Toshiba NV Series Hardware Manual page 81

Chapter 2 System Migration Procedures
(2) Using type1 light standard base unit
2
62
6E8C5563
Table 2.33 shows T3 series modules and units subject to migration to type1light.
Table 2.33 T3 series modules and units for migration
T3 series(Before conversion)
Name Specifications
T3 32k(SRAM)
32k
T3H 32k
64k
Main base unit 5 slots
10 slots
Expansion base 6 slots
unit
11 slots
Power module AC100V/200V
DC24V
Expansion Main(1 channel)
interface module Expansion
Long-distance(for main unit)
Long-distance(for middle unit)
Long-distance(for end unit)
Main(2 channels)
*1: Use PUM12 if program capacity exceeds the 32k step.
*2: Not available when PUM12 is used.
*3: The number of I/O mountable slots on the base unit differs from the T3 series.
The T3/T3H system which contains more than eight G3 I/O modules on one base
unit cannot be converted to a system configured with the type1 light standard
base unit using the T-PDS conversion tool.
After converting G3 I/O to a system containing 8 or less modules, convert it to a
type1 light standard base unit system. Then add G2 I/O, equivalent to the deleted
G3 I/O, to another base unit.
*4: Up to three expansion base unit can be connected.
*5: Only for T3H.
Model
PU315
PU325
PU325H
PU326H
BU315
BU31A
BU356
BU35B
PS361
PS332/PS332A
IF311
IF351
IF312
IF352
IF353
*5
IF321
Migration (After conversion)
Model Remarks
PUM11 32k
*1
PUM12 64k
*3
BU648E Main
BU643D
*2
BU668
*2
BU666
*2
BU664
*3 *4
BU668 Expansion
BU666
BU664
PS691 AC100V/200V
PS632 DC24V
*4
IF661 Main/Expansio
n