Toshiba NV Series Hardware Manual page 68

2.3 T3 Series
There are two ways of migration to T3 series PUM11/PUM12:
Changing the G3 I/O module to the G2 I/O module
Retaining the G3 I/O module
For retaining the G3 I/O module, refer to 2.4.
2.3.1 CPU Module
The T3 series CPU modules (T3/T3H/T3V
T-PDS conversion tool.
Table 2.22 T3 series CPU module conversion
Before conversion
PROSEC
T series
Table 2.23 Comparison of CPU module/controller module specifications
Model
Applicable I/O
Development tool
Station bus
Program capacity
Programing language
I/O registers
Data registers
Execution
speed
Transmission
port
◆Remark：
Not all specifications are listed in the above comparison table.
Confirm the specification in the relevant instruction manual.
After conversion
PUM11
PU315
T3
PU325
PU325H
T3H
PU326H
PU325V
*
T3V
PU326V
○: Selectable, ×: Not selectable
*: For the conversion of T3V, refer to the same conversion
procedure for T3H.
T3 T3H
PU315/325 PU325H
G3 I/O G3 I/O
TPDS TPDS
No No
32k step 32k step
LD，SFC LD，SFC
256W 512W
8kW 8kW
Contact 0.15us 0.1us
Coils 0.3us 0.2us
Moving 0.98us 0.54us
Add 2.25us 0.9us
Tool RS232C RS232C
connection
Computer RS485 RS485
Link
No No
Ethernet
Others
－ －
*
) are converted to PUM11/PUM12 using the
nv controller type1 light
PUM12 PUM14
○ ○ ×
○ ○ ×
○ ○ ×
○ ○ ×
○ ○ ×
○ ○ ×
nv controller type1 light
PU326H PUM11
G2 I/O
Engineering tool
No
64k step 32k step
LD，SFC，FBD，ST
3kW
8kW
0.08us
0.16us
0.08us
0.08us
USB
RS485
Yes
－
T series Migration User's Manual - Hardware -
PUM12
Yes
64k step
0.04us
0.08us
0.04us
0.04us
TC-net I/O
49
2