Toshiba NV Series Hardware Manual page 77

Chapter 2 System Migration Procedures
2.3.6 Examples of Migration Conversion
2
(1) Using dedicated base unit BUM7B (recommended)
58
6E8C5563
Examples of converting T3 series to type1 light for migration are shown below.
Table 2.30 shows T3 series modules and units subject to migration to type1 light.
Table 2.30 T3 series modules and units for migration
T3 series(Before conversion)
Name Specifications
T3 32k(SRAM)
32k
T3H 32k
64k
Main base unit 5 slots
10 slots
Expansion base 6 slots
unit
11 slots
Power module AC100V/200V
DC24V
Expansion Main (1 channel)
interface module Expansion
Long-distance(for main unit)
Long-distance(for middle unit)
Long-distance(for end unit)
Main (2 channels)
*1: Change the rated voltage specification from 24Vdc to 100/200Vac to convert to
BUM7B.
*2: Controller module PUM12 can be used for BUM7B. PUM11 cannot be used.
*3: After conversion to BUM7B, the T3 series expansion base unit is used as the remote
base unit for TC-net I/O loop using the G2 I/O adapter module.
*4: Use PUM12 if program capacity exceeds the 32k step.
*5: Only for T3H.
Migration(After conversion)
Model Model
PU315 PUM12
PU325
PU325H
PU326H
BU315 BUM7B
BU31A
BU356 BUM7B
BU35B
PS361 BUM7B
PS332/PS3 BUM7B
32A
IF311 GA922
IF351
IF312
IF352
IF353
*5
IF321
Remarks
*2 *4
64k
Main(with power)
*3
Remote(with
power)
AC100V/200V
*1 *1
AC100V/200V
*3
G2 I/O adapter
Module