Modify Master Pin Code; User Settings - Philips EasyKey User Manual

◆How to enter master mode
1
Wake up the
keypad
2 Press [#] before inputting any other
numbers. After hearing a voice prompt
of "Enter master PIN code", enter your
master PIN code and confirm with [#].
Then you are in master mode.

Modify master PIN code

Press [#], enter master PIN code and
confirm with [#].
1
Press [1] to modify master PIN code.
Enter the new master PIN code and
. Re-enter the new
confirm with [#]
master PIN code and confirm with
[#]. After hearing a voice prompt
of "Succeeded", press [*] several
times until you exit master mode.
10

User settings

Register a user PIN code
Press [#], enter master PIN code and
confirm with [#].
2 1
Press [2] to enter user registration, then
press [1] to register a new user PIN code,
which will be automatically numbered
and announced by the system.
Enter a user PIN code of 6 to 12 digits
and confirm with [#]. Then re-enter
the user PIN code and confirm with[#].
After hearing a voice prompt of
"Succeeded", press [*] several times
until you exit master mode.
Register a one-time user PIN code
Press [#], enter master PIN code and
confirm with [#].
2 2
Press [2] to enter user settings, then
press [2] again to enter one-time PIN
code registration.
Enter a one-time user PIN code of 6 to 12
digits and confirm with [#]. Re-enter and
confirm with [#]. After hearing a voice
prompt of "Succeeded", press [*] several
times until you exit master mode.
Register a fingerprint
Press [#], enter master PIN code and
confirm with [#].
3
2
Press [2] to enter user settings, then press
[3] to enter fingerprint registration. The
system will automatically number the
fingerprint and broadcast the number.
Place your finger against the sensor. After
hearing a voice prompt of "Take away
your finger and enroll again", please take
away your finger and re-place it against
the sensor. After hearing a voice prompt
of "Succeeded", press [*] several times
until you exit master mode.
Attention
The fingerprint needs to be collected for at
least 8 times.
Register a card
Press [#], enter master PIN code and
confirm with [#].
4
2
Press [2] to enter user registration, then
press [4] to enter card registration. The
system will automatically number the
card and broadcast the number.
Hold the card close to the card reader
until you hear a beep. After hearing a
voice prompt of "Succeeded", press [*]
several times until you exit master mode.
User Information
Deletion
Delete a user PIN code
Press [#], enter master PIN code and
confirm with [#].
3 1 1
Press [3] to enter user deletion, then press
[1] to enter user PIN code deletion. Press [1]
again to delete a single user PIN code.
Enter the 2-digit [user code] (00-09) of
the user PIN code that is to be deleted
and confirm with [#]. After hearing a voice
prompt of "Succeeded", press [*] several
times until you exit master mode.
Delete all user PIN codes
Press [#], enter master PIN code and
confirm with [#].
3 1
2
Press [3] to enter user deletion,
then press [1] to enter user PIN code
deletion. Press [2] to delete all user PIN
codes. After hearing a voice prompt of
"Succeeded", press [*] several times until
you exit master mode.
11