How To Set Up Your Easykey; Pre-Setup Instructions; Modify Master Pin Code; User Settings - Philips EasyKey User Manual

4. How to set up your EasyKey

Pre-setup Instructions:

◆There are 2 modes in the EasyKey: General mode and dual verification mode.
General mode
Unlock with any registered
identity information
◆User Number
You can delete a single user information by its user
number without having to delete everything.
◆You can record the user information in the following table for future query.
Number Name
00
01
02
03
04
05
06
07
08
09
◆Icon annotation
Master One-time Visitor User PIN
PIN code user PIN PIN code
code code
Attention
1.Press [*] key to return to the previous menu.
2. The default master PIN code is 12345678.
10
Dual verification mode
Unlock with any two of PIN
code, card and fingerprint
Fingerprint PIN Code Card
User User
Fingerprint Card
number number
Reader
00-09 00-99
◆How to enter master mode:
2
Press [#] before inputting any
other numbers. After hearing a
voice prompt of "Enter master PIN
code", enter your master PIN code
and confirm with [#]. Then you are
in master mode.

Modify master PIN code

Press [#], enter master PIN code
and press [#] to confirm.
1
Press [1] to modify master PIN code.
# key
Enter the new master PIN code and
press [#] to confirm. Re-enter the
new Master PIN code and press
[#]. After hearing a voice prompt
of "Succeeded", press [*] several
times until you exit master mode.

User settings

Register a user PIN code
1
Wake up the
keypad.
Press [#], enter master PIN code and
press [#] to confirm.
2 1
Press [2] to enter user registration, then
press [1] to register a new user PIN code,
which will be automatically numbered
and broadcasted by the system.
Enter a user PIN code of 6 to 12 digits,and
press [#] to confirm. Then re-enter it
and press [#] to confirm. After hearing
a voice prompt of "Succeeded", press
[*] several times until you exit master
mode.
Register a one-time user PIN code
Press [#], enter master PIN code and
press [#] to confirm.
2 2
Press [2] to enter user settings, then press [2]
again to enter one-time PIN code registration.
Enter a one-time user PIN code of 6 to
12 digits and press [#] to confirm. Re-
enter and press [#] to confirm. After
hearing a voice prompt of "Succeeded",
press [*] several times until you exit
master mode.
11