Miele KMDA 7633 FR Installation Instructions Manual

Safety instructions for installation


Risk of damage from incorrect installation.
Incorrect installation can cause damage to the cooktop.
The cooktop must only be installed by a qualified person.

Danger of electric shock!
Incorrect connection to the power supply may result in an electric shock.
The cooktop must be connected to the power supply by a qualified electrician.

Damage from falling objects.
Take care not to damage the cooktop when fitting wall units or a rangehood
above it.
Fit the wall units and the rangehood before the cooktop.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material.

The cooktop must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

A gas cooktop must not be installed adjacent to this cooktop.

This cooktop must not be installed above ovens unless these
have a built-in cooling fan.

After installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.

The connection cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.

Carefully observe the safety clearances listed on the following
pages.
11464020-02
Installation