Assembling The Kibbeh Attachment; Assembling The Biscuit Attachments - Silvercrest SFW 350 C2 Operating Instructions Manual

7) Screw the ring clamp
8) Assemble the meat grinder casing
meat grinder".

Assembling the kibbeh attachment

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► For the kibbeh attachment
required! If need be, remove them both from the meat grinder casing
The transport screw
3) Coat all metal parts with cooking oil.
4) If not already done, place the transport screw
ment
5) Insert the two plastic parts of the kibbeh attachment
on the bottom kibbeh attachment
meat grinder casing
6) When everything has been attached correctly, screw the ring clamp
on hand-tight.
7) Assemble the meat grinder casing
meat grinder".

Assembling the biscuit attachments

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► For the biscuit attachment
required! If need be, remove them both from the meat grinder casing
The transport screw
3) Coat all metal parts with cooking oil.
4) If not already done, place the transport screw
ment
│ GB │ IE │ NI │ CY
■ 8
on hand-tight.
.
, the cross blade
remains inside the mincer attachment
.
.
.
, the cross blade
remains inside the mincer attachment
.
as described under "Assembling the
as described under "Assembling the
with the spring
inside the mincer attach-
so that the fixings
ring are located in the openings in the
as described under "Assembling the
as described under "Assembling the
with the spring
inside the mincer attach-
is not
.
.
back
is not
.
.
SFW 350 C2