Assembly / Disassembly; Assembling The Meat Grinder - Silvercrest SFW 350 C2 Operating Instructions Manual

WARNING! RISK OF INJURY!
This appliance may be used by persons with limited physi-
►
cal, sensory or mental capabilities or lack of experience
and knowledge, provided that they are under supervision
or have been told how to use the appliance safely and are
aware of the potential risks.
The appliance must not be used as a plaything by children.
►

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corro-
sion. Therefore, carefully clean all of the parts before using the appliance
for the first time, as described in detail in the chapter "Cleaning". After
subsequent usage, always apply a light coating of cooking oil to the metal-
lic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.

Assembling the meat grinder

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw
2) Place the spring
3) Then fit the cross blade
spring
correctly on the square axle.
│ GB │ IE │ NI │ CY
■ 6
in the meat grinder casing
onto the transport screw
on so that the sharp side points away from the
. Ensure that the square opening in the cross blade
.
.
is placed
SFW 350 C2