Sony DVP-NS300 Operating Instructions Manual page 53

Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote
TV I/C!.)
- cl*/*l+
1
Hold down TV I/&, and enter your TV's
manufacturer's code (see the table
below) using C/*/W+
2 Release TV 116
Manufacturer's codes of controllable
TVs
Manufacture
Press Cl*/+/+ to input code
Sonv (default) *+
General Electric
* +
SVC +*
Panasonic
Philips
. If you enter a new manufacturer's code, the code
previously entered will be erased
. When you replace the batteries of the remote, the
code you have set may be reset to the default setting
Set the appropriate code again
Controlling the TV
By adjusting remote signal, you can control
the sound level, input source, and power
switch of your TV with the supplied remote
TV I/&
- TV/VIDEO
-
VOL +/-
You can control your TV using the buttons
below
By pressing You can
TV I/ti
Turn the TV on or off
5 -.
VOL (volume) Adjust the volume of the
TV z
+I-
d
TV/VIDEO
Switch the TV's input source =.
between the TV and other input
g
sources
Depending on the units being connected, you may not 5
be able to control your TV or to use some of the
buttons
2
n
Sham
Toshiba
53