Sony DVP-NS330 Service Manual

Sony DVP-NS330 Service Manual

Cd/dvd player
Hide thumbs Also See for DVP-NS330:
Table of Contents

Advertisement

DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P
SERVICE MANUAL
Photo : DVP-NS325
System
Laser: Semiconductor laser
Signal format system: NTSC
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/
DVD VIDEO (PCM 48 kHz): 2 Hz to
22 kHz (±0.5 dB)/CD: 2 Hz to 20 kHz
(±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT (L/R) AUDIO jacks only)
Harmonic distortion: 0.003%
Dynamic range: DVD VIDEO: 103 dB/
CD: 99 dB
Wow and flutter: Less than detected
value (±0.001% W PEAK)
The signals from LINE OUT L/R
(AUDIO) jacks are measured. When you
play PCM sound tracks with a 96 kHz
sampling frequency, the output signals
from the DIGITAL OUT (COAXIAL) jack
are converted to 48 kHz sampling
frequency.
Outputs/Inputs (NS325)
Jack name: (Jack type/Output or
Input level/Load impedance)
Outputs (NS725P/NS530/NS730P/
NS330/NS333/NS430/NS433)
Jack name: (Jack type/Output level/
Load impedance)
RMT-D152A/D156P/D157P/D152E/D153A/D158P
RMT-D152A
SPECIFICATIONS
LINE OUT (AUDIO): Phono jack/
2 Vrms/ 10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/-18d Bm (wave length:
660 nm) (NS725P/NS530/NS730P/
NS430/NS433)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms (NS325/NS725P/
NS530/NS730P/NS330/NS333/
NS430/NS433)
COMPONENT VIDEO OUT (Y, P
Phono jack/Y: 1.0 Vp-p/P
0.65 Vp-p/75 ohms (NS325/NS725P)
COMPONENT VIDEO OUT (Y, P
P
/C
): Phono jack/Y: 1.0 Vp-p,
R
R
P
/C
, P
/C
: 0.7 Vp-p/75 ohms
B
B
R
R
(NS730P)
COMPONENT VIDEO OUT (Y, C
Phono jack/Y: 1.0 Vp-p, C
0.7 Vp-p/75 ohms (NS530)
LINE OUT (VIDEO): Phono jack/
1.0 Vp-p 75 ohms (NS325/NS725P/
NS530/NS730P/NS330/NS333/
NS430/NS433)
S VIDEO OUT: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
(NS325/NS725P/NS530/NS730P/
NS330/NS333/NS430/NS433)
US Model
DVP-NS325/NS725P
Canadian Model
DVP-NS325/NS725P
PX Model
DVP-NS325/NS725P
E Model
DVP-NS325
Mexico Model
DVP-NS325
Brazilian Model
DVP-NS325
New Zealand Model
General
Power consumption: 13 W/ 14 W
Dimensions (approx.): 430 × 55.5 ×
244 mm (17 × 2
(NS325/NS530/NS330/NS333)
430 × 55.5 × 237 mm (17 × 2
9
3
/
in.) (NS430/NS433/NS725P/
5
NS730P)
Supplied accessories
, P
):
See page 14 (NS325)
B
R
, P
:
See page 15 (NS725P/NS530/NS730P/
B
R
NS330/NS333/NS430/NS433)
/C
,
B
B
Specifications and design are subject to
change without notice.
E
S
/C
):
NERGY
B
R
, C
:
mark.
B
R
E
As an
NERGY
Corporation has determined that this
product meets the
guidelines for energy efficiency.
CD/DVD PLAYER
Argentina Model
DVP-NS325
AEP Model
DVP-NS330/NS333/NS430/
NS433
UK Model
DVP-NS330/NS430
Russian Model
DVP-NS330
Hong Kong Model
DVP-NS530/NS730P
Singapore Model
DVP-NS530/NS730P
Taiwan Model
DVP-NS530
Korea Model
DVP-NS530/NS730P
Saudi Arabia Model
DVP-NS530
Middle East Model
DVP-NS530/NS730P
Australian Model
DVP-NS530/NS730P
DVP-NS530/NS730P
× 9
/
/
in.)
3
5
16
8
×
3
/
16
TAR
is a U.S. registered
S
TAR
Partner, Sony
E
S
NERGY
TAR

Advertisement

Table of Contents
loading

Summary of Contents for Sony DVP-NS330

  • Page 1 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P RMT-D152A/D156P/D157P/D152E/D153A/D158P US Model Argentina Model SERVICE MANUAL DVP-NS325/NS725P DVP-NS325 Canadian Model AEP Model DVP-NS325/NS725P DVP-NS330/NS333/NS430/ NS433 PX Model UK Model DVP-NS325/NS725P DVP-NS330/NS430 E Model Russian Model DVP-NS325 DVP-NS330 Mexico Model Hong Kong Model DVP-NS325 DVP-NS530/NS730P Brazilian Model Singapore Model...
  • Page 2 REPLACE THESE COMPONENTS WITH SONY PARTS FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE DISASSEMBLY Disc Removal Procedure (at POWER OFF) ....5 How to Service MB-108 Board ........5 2-1. Upper Case ..............2-1 2-2. Front Panel Assembly ........... 2-1 GENERAL 2-3. Loading Assembly ............2-2 2-4. Optical Device (KHM-290AAA) ........2-2 Precautions ..............
  • Page 4 TEST MODE 6-1. General Description ............6-1 6-2. Starting Test Mode ............6-1 6-3. Syscon Diagnosis ............6-1 6-4. Drive Auto Adjustment ..........6-5 6-5. Drive Manual Operation ..........6-7 6-6. Mecha Aging ..............6-11 6-7. Emergency History ............6-11 6-8.
  • Page 5: Service Note

    SERVICE NOTE 1. DISC REMOVAL PROCEDURE (at POWER OFF) 1) Open dust cover to access to a hole insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck can in the direction of the arrow A. (See Fig. 1) 2) Draw out the tray in the direction of the arrow B, and remove a disc.
  • Page 6 4) Fix the CK-120 board to the location where the MB-108 board is removed. 6 FMM-48 flexible board (CN203, 48P) 5 FMO-8 flexible board (CN204, 8P) 7 Connector (CN102, 6P) 4 Four screws SUMITITE (B3)+BV) 8 FMS-23-108 flexible cable (CN201, 5P) 3 MB-108 board 1 Connector (CN601, 25P)
  • Page 7 6) Set complete! Fig. 6. – 7 –...
  • Page 8 MEMO – 8E – – 8 –...
  • Page 9: General

    If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Example of discs that the player Note on playback operations of Index to Parts and Controls cannot play...
  • Page 10 Front panel display Rear panel When playing back a DVD Lights up when you can change the angle (46) Disc type Playing status DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT PCM/DTS/ DOLBY DIGITAL COAXIAL R-AUDIO-L VIDEO Current title/chapter or playing Lights up during Current audio signal (40) A DIGITAL OUT (COAXIAL) jack (19)
  • Page 11: Hookups

    NDisplay 3 Displaying the Control Bar in Shows the same information as Display 2 stop mode during playback. Hookups The following displays appear when the Hooking Up the Player DISPLAY button is repeatedly pressed during stop mode. You can make basic adjustments and customize the player to suit Follow Steps 1 to 6 to hook up and adjust the settings of the player.
  • Page 12: Step 4: Connecting The Audio Cords

    Connecting to your TV Step 4: Connecting the Audio Cords This connection will use your TV speakers for sound. Refer to the chart below to select the connection that best suits your system. Be sure to also read CD/DVD player the instructions for the components you wish to connect.
  • Page 13: Step 5: Connecting The Power Cords

    Connecting to an AV amplifier (receiver) with a digital input jack having Step 5: Connecting the Power Cord a Dolby Digital or DTS decoder and 6 speakers Plug the player and TV power cords into an AC outlet. This connection will allow you to use the Dolby Digital or DTS decoder function of your AV amplifier (receiver).
  • Page 14: Resuming Playback From The Point Where You Stopped The Disc (Multi-Disc Resume)

    Notes on playing DVDs with a DTS sound For more details about the Playback Dial, see Notes Resuming Playback from page 35. track ** For DVD VIDEOs and DVD-RWs/DVD-Rs • “MULTI-DISC RESUME” in “CUSTOM • DTS audio signals are output only through the Point Where You only SETUP”...
  • Page 15: Various Play Mode Functions

    When you insert a DATA CD and press H, See the instructions of the CD-R/CD-RW Various Play Mode 1 ( 3 0 ) device or recording software (not supplied) the numbered tracks are played sequentially, for details on the recording format. from through .
  • Page 16: Searching For A Scene

    To return to normal play Playing repeatedly (Repeat Play) A13 – 0:27:34 B Press CLEAR, or select “OFF” in Step 2. z Hints You can play all of the titles or tracks on a • You can set Repeat Play while the player is disc or a single title, chapter, or track stopped.
  • Page 17 N When playing a DVD N When playing a DVD Notes TITLE Viewing Information About the • T * : * : * (hours: minutes: seconds) CHAPTER • You cannot search for a scene on a DVD+RW Playing time of the current title Disc using the time code.
  • Page 18 R: right) without using actual rear speakers. L: Front speaker (left) the Dolby Surround Sound processed TVS was developed by Sony to produce R: Front speaker (right) signals or the Dolby Digital sound’s surround sound for home use using just a : Virtual speaker monaural rear audio signals.
  • Page 19 • CINEMA 2: White colors become Enhancing the Playback Changing the Angles brighter and black colors become To cancel the “DIGITAL VIDEO richer, and the color contrast is ENHANCER” setting Picture increased. (DIGITAL VIDEO Select “OFF” in Step 2. If various angles (multi-angles) for a scene ENHANCER) are recorded on the DVD, “...
  • Page 20 You can control the sound level, input source, If your TV is listed in the table below, set the Press O RETURN. and power switch of your Sony TV with the appropriate manufacturer’s code. supplied remote. To turn off the display...
  • Page 21 Press X/x to select “CUSTOM,” Select a setting using X/x, then Setting the Display or then press ENTER. press ENTER. Settings and Adjustments Sound Track Language The Setup Display appears. The setting is selected and setup is complete. Using the Setup Display LANGUAGE SETUP (LANGUAGE SETUP) Example: “16:9”...
  • Page 22 (page 7). motion Play mode. , Try using the DVD’s menu instead of the nearest Sony dealer (for customers in the , The player is in fast forward or fast reverse direct selection button on the remote (page U.S.A only).
  • Page 23 Dolby Digital, chapters may be recorded. to prevent the player from malfunctioning, a , Contact your Sony dealer or local allowing you to enjoy a more real audio presence. five-character service number (e.g., C 13 50) authorized Sony service facility.
  • Page 24 If you have any questions or problems Your player has a region code printed on the concerning your player, please consult your back of the unit and only will play DVD nearest Sony dealer. VIDEO discs (playback only) labeled with Notes Notes about the Discs Index to Parts and Controls •...
  • Page 25: Guide To The Control Menu Display

    Front panel display Rear panel When playing back a DVD DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT Playing status Disc type Lights up when you can change the angle (48) PCM/DTS/ DOLBY DIGITAL COAXIAL OPTICAL R-AUDIO-L VIDEO A DIGITAL OUT (COAXIAL) jack (21) D LINE OUT (VIDEO) jack (16) Lights up during Current title/chapter or playing...
  • Page 26 List of Control Menu Items REPEAT (page 35) Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/ Item Item Name, Function, Relevant Disc Type track/album repeatedly. TITLE (page 38)/SCENE (page 38)/TRACK (page 38) A-B REPEAT (page 35) Selects the title, scene, or track to be played.
  • Page 27 In the case of 480 progressive scan picture problems, it is recommended that you switch the connection to the standard definition output. If there are questions regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer Notes service center.
  • Page 28 Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro an MD deck or DAT deck Logic) decoder and 3 to 6 speakers If the stereo amplifier (receiver) has audio input jacks L and R only, use .
  • Page 29 “DTS” is selected. Is this player connected to an amplifier (receiver) ? Select the type of jack you AUDIO SETUP Playing Discs AUDIO ATT: are using. AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND LINE OUTPUT L/R (AUDIO) Playing Discs DIGITAL OUT: DIGITAL OUTPUT DOLBY DIGITAL: D-PCM...
  • Page 30 z Hint Using the DVD’s Menu Playing VIDEO CDs with To play without using PBC, press ./> or the Playing an MP3 Audio number buttons while the player is stopped to select PBC Functions Track a track, then press H or ENTER. (PBC Playback) “Play without PBC”...
  • Page 31 cancel using X/x or the number buttons, The options for “SHUFFLE” appear. Next, press X/x or the number buttons to 1 2 ( 2 7 ) and press c. PLAY select “03” under “C,” then press 1 8 ( 3 4 ) DVD VIDEO 1 2 ( 2 7 ) PLAY...
  • Page 32 The “SLOW2 y”/“SLOW2 you want, release the button to return to ” playback Searching for a Title/ speed is slower than “SLOW1 y”/“SLOW1 normal playback speed. .” Searching for a Scene Chapter/Track/Scene, Locating a point quickly by Playing one frame at a time Searching for a playing a disc in fast forward or etc.
  • Page 33: Viewing Information About The Disc

    N When playing a DVD When playing a VIDEO CD (without PBC Checking the information on the Viewing Information About the • T * : * : * (hours: minutes: seconds) functions) or CD front panel display Playing time of the current title Disc Playing time and number of the •...
  • Page 34: Sound Adjustment

    R: right) without using actual rear speakers. you can change the audio format. If the DVD • 1/L: The sound of the left channel TVS was developed by Sony to produce is recorded with multilingual tracks, you can *“PCM,” “DTS,” or “DOLBY DIGITAL” is...
  • Page 35: Adjusting The Picture Quality (Bnr)

    Press ENTER. • CINEMA 2: White colors become Adjusting the Picture Adjusting the Playback brighter and black colors become The disc plays with the setting you richer, and the color contrast is selected. Quality Picture (BNR) (CUSTOM PICTURE MODE) increased. •...
  • Page 36: Using Various Additional Function

    Press X/x to select To turn off the Custom Parental Control Using Various Additional (PARENTAL CONTROL), then press function Functions ENTER. Follow Steps 1 through 3 of “Custom The options for “PARENTAL Number Parental Control.” Locking Discs CONTROL” appear. buttons (CUSTOM Press X/x to select “OFF t,”...
  • Page 37: Controlling Your Tv With The Supplied Remote

    You can control the sound level, input source, If your TV is listed in the table below, set the MENU: ENGLISH and power switch of your Sony TV with the ORIGINAL AUDIO: appropriate manufacturer’s code. By using the Setup Display, you can make...
  • Page 38: Additional Information

    Should any problem persist, consult your jack when “DOLBY DIGITAL” is set to adjustments to the , The player is connected to the wrong input nearest Sony dealer (for customers in the “D-PCM” (page 63). “DOWNMIX” item in jack on the amplifier (receiver) (page 21, USA only).
  • Page 39: Glossary

    , The disc is skewed. , Contact your Sony dealer or local The language for the sound track cannot , The player cannot play certain discs (page 6).
  • Page 40: Language Code List

    Language Code List For details, see pages 45, 48, 59. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1350 Malayalam...
  • Page 41: Upper Case

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE 1 Tapping screw 4 Tray cover 3 Three screws (SUMITITE(B3)+BV) Chassis back 2 Tapping screw Dust Cover 2-2. FRONT PANEL ASSEMBLY Two screws SUMITITE(B3+BV) Claws Claw...
  • Page 42: Loading Assembly

    2-3. LOADING ASSEMBLY Three screws SUMITITE(B3)+BV) Loading assembly 1 FMM-48 flexible board (CN203, 26P) 2 FMO-8 flexible board (CN204, 9P) 4 FMS-23-108 flexible cable (CN201, 5P) 2-4. OPTICAL DEVICE (KHM-290AAA) 2 Insulator 5 Optical device (KHM-290AAA) 3 FMM-48 flexible board(CN203, 26P) 2 Two insulator 4 FMO-8 flexible board(CN204, 9P) 1 Three insulator screws...
  • Page 43: Dc Motor And Ms128 Board

    2-5. DC MOTOR and MS128 BOARD 2-6. ER-21 BOARD 1 ER-21 board 3 Two screws (SUMITITE(B3+BV) 2 FAE-11 flexible cable(CN102, 21P)
  • Page 44: Board

    2-7. AF-098 BOARD 3 Two screws (SUMITITE(B3)+BV) 1 ER-21 board 2 FAE-11 flexible cable (CN102, 21P) 4 AF-98 board 5 Connector (CN601, 25P) 6 Eight screws (SUMITITE(B3)+BV) 2-8. MB-108 BOARD 6 FMM-48 flexible board(CN203, 48P) (When installing, fix it not to touch the chassis with the lead pin of the AF-98 board.) 5 FMO-8 flexible board(CN204, 8P)
  • Page 45: Switching Regulator

    2-9. SWITCHING REGULATOR 1 Four screws SUMITITE (B3)+BV) 3 Connector (CN101, 2P) 2 Connector (PF-133, CN201, 13P) *(PF-135, CN201, 13P) *Euro Model only 4 Power board...
  • Page 46: Interval Views

    2-10. INTERNAL VIEWS TOP VIEW MS128 MOUNT Optical Device (KHM-290AAA) A-6061-908-A BOTTOM VIEW...
  • Page 47: Circuit Boards Location

    2-11. CIRCUIT BOARDS LOCATION ER-21 BOARD (NS330/NS333/NS430/NS433) Power board AF-98 board (AUDIO/VIDEO OUT) MS-128 board (LOADING MOTOR) MB-108 board (DVD/OD RF AMP, SERVO, SW-384 board MOTORMDRIVE, AD DECODER, (SWITCH) SYSTEM CONTROL, AUDIO ADC, PLL)
  • Page 48 2-8E...
  • Page 49: Block Diagrams

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM ER-21 BOARD (SEE PAGE 4-21, 22 ) CN902 IC901 LINE 1 VIDEO BUFFER (RGB)-TV SELECT SWITCH AC IN J104(2/2) VIDEO OUT V,Y,C SWITCHING REGULATOR AF-098 BOARD R,G,B J103 (SEE PAGE 4-49 TO 4-58) (SEE PAGE 4-9 to 4-16) IC102 S.VIDEO OUT...
  • Page 50: System Control Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-2. SYSTEM CONTROL BLOCK DIAGRAM MB-108 BOARD (1/6) (SEE PAGE 4-27, 28) IC108 IC106 IC107 1M SRAM 32M FLASH HA 0 – 21 HA 0 – 21 HD 0 – 15 HD 0 – 15 IC104 tf 1 – 5 102 – 109 111 – 118 120 85 – 100 59 72 84 HA 0 –...
  • Page 51: Rf/Servo Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-3. RF/SERVO BLOCK DIAGRAM IC201 tl IC201 2 (CD PB) IC201 2 (DVD PLAY) IC201 rs (CD PB) IC201 rs (DVD PLAY) 890nsec 1.3Vp-p 20nsec 0.47Vp-p 20nsec 0.79Vp-p 433mVp-p 383mVp-p BASE UNIT MB-108 BOARD (2/6) KHM-290AAA/SERVICE ASSY IC301 (CD PB) IC301 (DVD PLAY) (SEE PAGE 4-29, 30, 31, 32)
  • Page 52: Signal Processor Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-4. SIGNAL PROCESSOR BLOCK DIAGRAM MB-108 BOARD (3/6) Except: NS325; E (SEE PAGE 4-31 to 4-34) IC404, 405* 16M SDRAM IC301 <zzz (DVD PLAY) IC303 16M DRAM 40ns/div 1.34Vp-p 301 <zzc (CD PB) 105 – 108·110 – 113· 135 – 138·140 – 143· 122·124·125·...
  • Page 53: Audio Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-5. AUDIO BLOCK DIAGRAM AF-098 BOARD (2/4) (SEE PAGE 4-11, 12) MB-108 BOARD (6/6) (SEE PAGE 4-37, 38) (NS430/NS433/NS725P/NS530/NS730P) IC204 D IN OPTICAL DIGITAL CN601 (3/3) CN203 (2/2) J201 SPDIF Q211 SPDIF BUFFER COAXIAL IC601 1 IC601 IC201 SIGNAL PROCESSOR AUDIO D/A CONVERTER AUDIO AMP (SEE PAGE 3-4)
  • Page 54: Video Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-6. VIDEO BLOCK DIAGRAM IC504 rf IC504 rd IC504 rs 1.08Vp-p 979mVp-p 508Vp-p 63.4usec 63.5usec 280nsec IC102 ed MB-108 Board (5/6) AF-098 (1/4) * IC102 36 pin :EXCEPT (NS330/NS333/NS430/NS433) IC102 24 pin :(NS330/NS333/NS430/NS433) (SEE PAGE 4-33,34) IC504 (SEE PAGE 4-9, 10) IC102 VIDEO ENCODER VIDEO BUFFER...
  • Page 55: Interface Control Block Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-7. INTERFACE CONTROL BLOCK DIAGRAM AF-098 BOARD (4/4) (SEE PAGE 4-15, 16) CN401 SYSTEM CONTROL XIFCS XIFCS (SEE PAGE 3-3) XIFBUSY XIFBUSY BUSY NS725P/NS730P XFRRST S809 S808 NS725P/NS730P XFRRST SW-128 BOARD /FRRST D401 PICTURE SURROUND (SEE PAGE 4-45,46) DVD LED MODE PROGRESSIVE LED R812...
  • Page 56: Power Block Diagram (1/3)

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-8. POWER BLOCK DIAGRAM (1/3) SWITCHING REGULATOR (HS8S2U): (NS325: US, CND, MX/NS725P: US, CND) T101 D221 L221 POWER EVER+11V TRANSFORMER Q211 L211 D211 SW+11V • Q311 P311 D311 L311 SW+5V CN101 AC IN D101 F101 L101 LINE FILTER Q611 P611 D611 L611...
  • Page 57: Power Block Diagram (2/3)

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-9. POWER BLOCK DIAGRAM (2/3) SWITCHING REGULATOR (ETXNY410M0F): (NS325: PX, E, AR, BR/NS530/NS725P: PX, /NS730P: HK, SP, KR, ME, AUS) (ETXNY410E0F): (NS330/NS333/NS430/NS433) CN201 Q301 L301 D301 SW+11V • T101 L205 D201 L201 EVER+11V Q203 D202 F201 L202 SW+5V D104-D1107 CN101 AC IN F101...
  • Page 58: Power Block Diagram (3/3)

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 3-10. POWER BLOCK DIAGRAM (3/3) NS330: AEP,UK,RUS/ NS333: AEP/ NS430: AEP,UK/ NS433: AEP/ NS730P: AEP,UK AF-098 BOARD ER-21 BOARD CN471 PS472 CN102 CN901 EVER+11V IC901 +11V +11V VIDEO BUFFER Q472, 473 PS471 SELECT EVER-15.5V IC101 SWITCH -5V REG IC102 IC474 VIDEO EVER+5V...
  • Page 59: Printed Wiring Boards And Schematic Diagrams

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS * EURO MODEL ONLY FRAME SCHEMATIC DIAGRAM...
  • Page 60: Printed Wiring Boards And Schematic Diagrams

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block) For schematic diagrams: For printed wiring boards: • All capacitors are in µF unless otherwise noted. pF : µµF. •...
  • Page 61: Waveforms

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P AF-098 BOARD MB-108 BOARD IC102 ed IC103 3 IC201 ra (DVD PLAY) IC301 (CD PB) IC403 yd IC504 el 2.5Vp-p 1.7Vp-p 770mVp-p 3.3Vp-p 625mVp-p 131Vp-p 1.17msec 21msec 6.8usec 63.5usec IC102 ea IC103 8 IC201 rs (CD PB) IC301 (DVD PLAY) IC403 yg IC504 rs 2.0Vp-p...
  • Page 62 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P AF-098 (AUDIO OUT, VIDEO OUT, PS TROUGH, IF) PRINTED WIRING BOARD • : Uses unleaded solder. For printed wiring board AF-098 BOARD A SIDE AF-098 BOARD B SIDE There are a few cases that the part printed on this diagram isn’t mounted in this model. AF-098 BOARD B SIDE A SIDE...
  • Page 63 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-7 for printed wiring board of AF-98 board. • Refer to page 4-5 for waveform • Refer to page 4-17 for Differential Part List AF-98 BOARD (1/4) AUDIO OUT -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE 18mH...
  • Page 64: Video Out

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-7 for printed wiring board of AF-98 board. • Refer to page 4-5 for waveform • Refer to page 4-17 for Differential Part List AF-98 BOARD (2/4) VIDEO OUT 0.25W -REF.NO.:2000 SERIES- 2.7k 1/16W 0.25W...
  • Page 65 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-7 for printed wiring board of AF-98 board. • Refer to page 4-5 for waveform • Refer to page 4-17 for Differential Part List AF-98 BOARD (3/4) PS TROUGH -REF.NO.:4000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE -15.2...
  • Page 66 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-7 for printed wiring board of AF-98 board. • Refer to page 4-5 for waveform • Refer to page 4-17 for Differential Part List AF-98 BOARD (4/4) -REF.NO.:4000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE NS725/NS730...
  • Page 67: Board Differential Part List

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P AF-98 Board Differential Part List [VIDEO] [AUDIO] NS325 NS330/NS333 NS430/NS433 NS530 NS725P NS730P NS325/NS530 NS330/NS333/ NS730P/ NS430/NS433 NS725P C212 C112 0.1u 0.1u C215 220p 220p 220p 220p CN102 C216 220p 220p 220p 220p D108 HZM6.8WA1 HZM6.8WA1 D109 HZM6.8WA1 HZM6.8WA1 IC102 LA73050-TL LA73051-TL...
  • Page 68 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P ER-21 (EURO AV) PRINTED WIRING BOARD • : Uses unleaded solder. ER-21 BOARD A SIDE ER-21 BOARD B SIDE ER-21 BOARD B SIDE ER-21 BOARD Q901 Power board Q902 AF-98 board (AUDIO/VIDEO OUT) Q903 Q906 Q907 Q908 D901 D907 D929 D930 D932...
  • Page 69 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-19 for printed wiring board of ER-21 board. ER-21 BOARD (NS330/NS333/NS430/NS433) EURO AV -REF.NO.:9000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE IC 901 VIDEO BUFFER -0.6 -0.6 -0.6 -0.1 -5.1 -5.1 11.7 11.7...
  • Page 70 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P MB-108 (DVD/CD RF AMP,DIGITAL SERVO,MOTOR DRIVE,SERVO,AV DECODER,SD RAM, • : Uses unleaded solder. SYSTEM CONTROL,AUDIO DAC,PLL) PRINTED WIRING BOARD MB-108 BOARD SIDE A MB-108 BOARD SIDE B MB-108 BOARD A SIDE B SIDE IC101 IC104 IC301 IC103 IC302 IC106 IC107 IC402 IC403...
  • Page 71 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (1/6) SYSTEM CONTROL -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE The components identified by Les composants identifiés par...
  • Page 72: Schematic Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (2/6) MOTOR DRIVE -REF.NO.:2000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MS-81 -0.05...
  • Page 73 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (3/6) SERVO -REF.NO.:3000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE 1.3 3.3 -0.03...
  • Page 74: Schematic Diagram

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (4/6) AV DECODER -REF.NO.:4000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE 0.12 0.03...
  • Page 75 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (5/6) 1/P CONVERTER -REF.NO.:5000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE SIGNAL PATH VIDEO SIGNAL...
  • Page 76 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-23 for printed wiring board of MB-108 board. • Refer to page 4-5 for waveform • Refer to page 4-37 for Differential Part List MB-108 BOARD (6/6) AUDIO DAC, PLL -REF.NO.:6000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE TO AF-98 BOARD...
  • Page 77 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P MB-108 Borad Differential Part List [MB-108 (4/6) AV DECODER] NS325 NS330/NS333 NS530 NS725P NS730P [MB-108 (1/6)] NS430/NS433 NS325 NS330 NS333/NS430/ NS725P NS730P C441 0.01u 0.01u 0.01u 0.01u NS433/NS530 C106 C442 0.01u 0.01u 0.01u 0.01u C107 C447 0.01u 0.01u 0.01u 0.01u C124 C130...
  • Page 78 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P MB-128 (MECHA DECK) PRINTED WIRING BOARD • : Uses unleaded solder. MS-128 BOARD ER-21 BOARD (NS330/NS333/NS430/NS433) Power board AF-98 board (AUDIO/VIDEO OUT) MS-128 board (LOADING MOTOR) For printed wiring board MB-108 board There are a few cases that the part printed on SW-384 board (DVD/OD RF AMP, SERVO, MOTORMDRIVE, AD DECODER,...
  • Page 79 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-41 for printed wiring board of MS-128 board. MS-128 BOARD MECHA DECK -REF.NO.:6000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MECHA DECK MS-128 4-41 4-42...
  • Page 80 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SW-384 (SWITCH) PRINTED WIRING BOARD • : Uses unleaded solder. For printed wiring board SW-384 BOARD ER-21 BOARD There are a few cases that the part printed on A SIDE Power board (NS330/NS333/NS430/NS433) SW-384 BOARD A SIDE AF-98 board this diagram isn’t mounted in this model.
  • Page 81 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-45 for printed wiring board of SW-384 board. SW-384 BOARD SWITCH -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE Except NS430/NS433/ NS725P/NS730P NS325/NS333/NS430/NS433/ NS530/NS725P/NS730P Except NS430/ NS433/ NS725P/NS730P NS430/NS433/ NS725P/NS730P NS430/NS433/ NS725P/NS730P NS725P/NS730P SW-384 Borad Differential Part List The components identified by...
  • Page 82 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P HS8S2U (SWITCHING REGULATOR) PRINTED WIRING BOARD • : Uses unleaded solder. POWER BOARD (SW REG) SIDE A (HS8S2U) (NS325:US,CND,MX /NS725P:US,CND) POWER BLOCK (HS8S2U) ER-21 BOARD (NS330/NS333/NS430/NS433) Power board A SIDE B SIDE AF-98 board (AUDIO/VIDEO OUT) IC101 IC101 IC301 IC301 Q211 Q211...
  • Page 83 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-49 for printed wiring board of HS8S2U board. HS8S2U BOARD SWITCHING REGULATOR -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE The components identified by Les composants identifiés par mark or dotted line with mark une marque sont critiques are critical for safety.
  • Page 84 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P • : Uses unleaded solder. ETXNY410E0F (SWITCHING REGULATOR) PRINTED WIRING BOARD POWER BOARD (SW REG) SIDE A (ETXNY410E0F) (NS330/NS333/NS430/NS433) POWER BLOCK (ETXNY410E0F) ER-21 BOARD (NS330/NS333/NS430/NS433) Power board A SIDE B SIDE AF-98 board (AUDIO/VIDEO OUT) IC101 IC101 IC202 IC202 Q203 Q203 Q204...
  • Page 85 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-53 for printed wiring board of ETXNY410E0F board. ETXNY410E0F BOARD SW REG -REF.NO.:3000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE SW REG POWER BLOCK (ETXNY410E0F) 4-53 4-54...
  • Page 86 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P ETXNY410M0F (SWITCHING REGULATOR) PRINTED WIRING BOARD • : Uses unleaded solder. POWER BOARD (SW REG) SIDE A (ETXNY410M0F) (NS325: PX,E,BR,AR/NS530/NS725P:PX/NS730P:HK,SP,KR,ME,AUS) POWER BLOCK (ETXNY410M0F) ER-21 BOARD Power board (NS330/NS333/NS430/NS433) A SIDE B SIDE AF-98 board (AUDIO/VIDEO OUT) IC101 IC101 IC202 IC202 Q203 Q203...
  • Page 87 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P For Schematic Diagram • Refer to page 4-57 for printed wiring board of ETXNY410M0F board. ETXNY410M0F BOARD SW REG -REF.NO.:5000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE SW REG POWER BLOCK (ETXNY410M0F) 4-57 4-58...
  • Page 88 DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P 4-59 4-60E...
  • Page 89: Ic Pin Function Description

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. SYSTEM CONTROL PIN FUNCTION (MB-108 BOARD IC104: MB91307RPFV-G-BND-E1) Pin No. Pin name Function HA17-HA21 Address bus A17-A21 HA22 Not used I2C EEPROM write protect output XSACS Not used AVCC Power supply (+3.3 V) AVRH Reference power supply (+3.3 V) AVSS...
  • Page 90 Pin No. Pin name Function Power supply (+3.3 V) CKSW1 Not used OCSW1 Not used CS0X External ROM chip select signal output CS1X Extranal RAM chip select signal output CS2X AV DEC Chip select signal output CS3X AV DEC Chip select signal output CS4X ARP Chip select signal output CS5X...
  • Page 91: Test Mode

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment The same contents as board detail check by serial interface can easily using the remote commander and monitor TV. The be checked from the remote commander.
  • Page 92 General Description of Checking Method To quit the diagnosis and return to the Check Menu screen, [ENTER] press key. If an error occurred, the diagnosis is 2. Version suspended and the error code is displayed as shown below. (2-2) Revision ROM revision number is displayed.
  • Page 93 Servo (5-4) ARP to RAM Address Bus Data write t other address read discord check (4-2) Servo DSP Check Error 10: ARP Tt RAM address bus error Data write t read, and accord check Caution: Address and data display in case of an error is Error 12: Read data discord different from the display of other diagnosis 0x9249, 0x2942 and 0x4294 are written to the RAM...
  • Page 94 6. AV Decoder (7-7) Euro AV Through (European model only) AV Through output On/Off (6-2) 1935 RAM Error: Not detected. Data write t read, and accord check AV Through output is turned on. Error 14: AVD RAM read data discord This check is performed for European model only.
  • Page 95: Drive Auto Adjustment

    8. Audio Output 6-4. DRIVE AUTO ADJUSTMENT (8-2) ARP t 1935 (8-3) Test Tone On the Test Mode Menu screen, press 1 key on the remote commander, and the drive auto adjustment menu will be Error Codes List displayed. 00: Error not detected 01: RAM write/read data discord 03: EEPROM NG ## Drive Auto Adjustment ##...
  • Page 96 1. DVD-SL (single layer) 3. DVD Dual Layer Disc [ENTER] [ENTER] Select 1, insert DVD single layer disc, and press Select 3, insert DVD dual layer disc, and press key, key, and the adjustment will be made through the following and the adjustment will be made through the following steps, steps, then adjusted values will be written to the EEPROM.
  • Page 97: Drive Manual Operation

    0. Disc Check Memory 6-5. DRIVE MANUAL OPERATION Disc Check On the Test Mode Menu screen, select 2, and the manual operation menu will be displayed. For the manual operation, 1. SL Disc Check each servo on/off control and adjustment can be executed 2.
  • Page 98 2. Servo Control Once the disc type has been selected, the sector address or time code display field will appear as shown below. These values are displayed when PLL is locked. Servo Control 1. LD Off R. Sled FWD 2. SP Off L.
  • Page 99 3. Track/Layer Jump 4. Manual Adjustment Tracking/Layer Jump Manual Adjustment:Up/Down R. Fj (L1 −> L0) 1. 1Tj FWD 1. TRK. Offset L. Fj (L0 −> L1) 2. 1Tj REV 2. Focus Gain U. Lj (L1 −> L0) 3. 2Tj FWD 3.
  • Page 100 5. Auto Adjustment 6. Memory Check The display image is shown below and three screens in total can Auto Adjustment be selected. 1. Auto TRK. Offset EEPROM DATA 1 -– DL -– 2. Auto Focus Balance CD LCD 3. Auto Focus Offset Focus Gain xx xx 4.
  • Page 101: Mecha Aging

    6-6. MECHA AGING 6-8. VERSION INFORMATION ### Mecha Aging ### ### Version Infomation ### IF con. Ver.x.xxx(xxxx) Group Press OPEN key SYScon. Ver.x.xxx(xxxx) Model Region Servo DSP Ver: x.xxx Abort: STOP key AVD ucode Ver: xxxxxxxx Exit : RETURN The ROM version, region code, etc. are displayed if 5 is On the Test Mode Menu screen, selecting 3 executes the aging selected in the Test Mode Menu.
  • Page 102: If Con Self Diagnostic Function

    2. OPERATION OF SELF CHECK MODE 6-10. IF CON SELF DIAGNOSTIC FUNCTION The Self Check mode is the function to conduct the basic test to the FL display and DVD panel section. 1. AF-98 BOARD (IF CON) TEXT MODE The AF-98 board (IF CON) test mode is the IF CON self- 2-1.
  • Page 103 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) (2) MODEL display (for 2 seconds) (3) Version display (for 2 seconds) (4) ROM creation date display (for 2 seconds)
  • Page 104 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC404: Pin No. (Signal) Input Voltage [V] PIN ed (BRNKEY) PIN ef (PLAY) PIN eg (O/C) PIN eh (TVS) 0 - 0.21 PLAY OPEN/CLOSE PIC MODE...
  • Page 105 • Key code display (at input of H key, key code: 0Ah) • At input of faulty voltage • When key is pressed double 2-3-3. Remote Commander Key Name Display and Key Code Display 2-3-3-1. Transition Keys in Self Check Mode •...
  • Page 106 2-3-4. Communication Monitoring Display The communication state is momitored and displayed while the key name on the main unit and the remote commander is displayed. When the communication to the System Controller faired, VIDEO CD, DVD, nad CD segments turn on. •...
  • Page 107 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode • R key on the remote commander • SHUTTLE on the remote commander during Grid Test display (This unit does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/SHUTTLE) 2-3-6-2.
  • Page 108 (7G-1G) ANODE CONNECTION 6-18...
  • Page 109: Troubleshooting

    1-3. Clock signal check 6-11. TROUBLESHOOTING Measure the clock signal frequency at CPUCK (CL101) of 6-11-1. Cannot Enter Test Mode SYSCON (IC104) with an oscilloscope. You cannot enter the Test mode when either button has been pressed If the 8.25 MHz signal appears. t Check the machine by any reason with the board assembled in the front panel.
  • Page 110 1-3-2. When the 33 MHz signal appears at CPUCK 3. If the message “SDSP No Ack” appears after the menu • WAIT signal check is displayed. Observe XWAIT (pin-yj) of SYSCON (IC104) with an 3-1. ARP & SERVO clock signal check oscilloscope.
  • Page 111 6-11-4. The product itself is defective. 2-3. Check IFBSY (pin-5), XIFCS (pin-6), SI0 (pin-4), • If MB108 does not have any problem, SO0 (pin-1) and SC0 (pin-3) at CN101 The board other than MB-108 board is defective or If they are fixed to “H” or “L”. t The signal line has defective soldering, or is short- connection is defective or optical pickup block is defective or mechanism deck is defective...
  • Page 112 6-22E 6-22...
  • Page 113: Electrical Adjustment

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY CHECK In making adjustment, refer to 7-3. Adjustment ETXNY410M0F NS325 : PX, E, AR, BR Related Parts Arrangement. NS530 NS725P : PX, BR This section describes procedures and instructions necessary for NS730P : HK, SP, KR, ME, AUS adjusting electrical circuits in this set.
  • Page 114: Adjustment Of Video System

    7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-C <Purpose> 1. Video Level Adjustment (MB-108 BOARD) This checks whether the S video output S-C satisfies the NTSC <Purpose> standard. If it is not correct, the colors will be too dark or too This adjustment is made to satisfy the NTSC standard, and if not light.
  • Page 115: Checking Component Video Output B-Y

    5. Checking Component Video Output B-Y 6. Checking Component Video Output R-Y <Purpose> <Purpose> This checks component video output B-Y. If it is incorrect, This checks component video output R-Y. If it is incorrect, correct color will not be displayed when connected to, for instance, correct color will not be displayed when connected to, for instance, component input projector.
  • Page 116: Adjustment Related Parts Arrangement

    7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-108 BOARD (Side A) VIDEO LEVEL ADJ RV401 IC403 POWER BOARD (Side A) CN201 7-4E...
  • Page 117: Repair Parts List

    DVP-NS325/NS330/NS333/NS430/NS433/NS530/NS725P/NS730P SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS The components identified by mark or dotted line with mark are critical for safety. NOTE: Replace only with part number speci- • -XX and -X mean standardized parts, so they • Abbreviation fied.
  • Page 118: Main Section

    8-1-1. MAIN SECTION ns : not supplied qf qf Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-6061-362-A MB-108 BOARD COMPLETE A-6061-360-A AF-98 BOARD COMPLETE (NS325:US,CND,PX) (NS325:US,CND,PX,E,MX) A-6061-710-A MB-108 BOARD COMPLETE (NS325:E) A-6061-941-A AF-98 BOARD COMPLETE (NS325:BR,AR) A-6061-420-A MB-108 BOARD COMPLETE A-6061-384-A AF-98 BOARD COMPLETE (NS530) (NS325:MX)
  • Page 119 X-3952-915-2 PANEL ASSY, FRONT (NS730P) SILVER 1-790-588-12 CORD, POWER (AUS:NS530/NS730P) X-3952-916-2 PANEL ASSY, FRONT (NS725P) SILVER 3-070-883-02 SCREW, TAPPING BLACK 3-066-225-01 SONY BADGE (5-A) (NS325/NS530) BLACK 3-070-883-12 SCREW, TAPPING SILVER & GOLD 3-066-225-11 SONY BADGE (5-A) SILVER (NS325/NS530/ NS725P/NS730P) 3-080-912-31 CASE, UPPER...
  • Page 120: Mechanism Deck Assembly

    8-1-2. MECHANISM DECK ASSEMBLY ns : not supplied M001 Ref. No. Part No. Description Remark A-6061-320-A LOADING ASSY (T) 3-053-847-11 INSULATOR 3-080-534-01 INSULATOR SCREW Note : Note : A-6061-908-A KHM290AAA SERVICE ASSY The components identified Les composants identifiés par 3-080-478-01 BELT by mark or dotted line une marque...
  • Page 121: Electrical Parts List

    AF-98 8-2. ELECTRICAL PARTS LIST The components identified by NOTE: mark or dotted line with mark • Due to standardization, replacements in • SEMICONDUCTORS are critical for safety. Replace only with part number the parts list may be different from the In each case, u: µ, for example: specified.
  • Page 122 IC LA73053-TLM-E (NS725P/NS730P) JR413 1-216-295-00 SHORT CHIP JR415 1-216-295-00 SHORT CHIP IC103 8-759-662-86 IC NJM79M05DL1A(TE2) JR417 1-216-295-00 SHORT CHIP IC103 8-759-667-17 IC L79M05TLL-SONY-TL JR418 1-216-295-00 SHORT CHIP IC201 6-701-937-01 IC TJM4558CDT JR419 1-216-295-00 SHORT CHIP IC201 8-759-249-16 IC NJM4558M-TE2 IC201 8-759-425-23...
  • Page 123 AF-98 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark <TRANSISTOR> R211 1-208-800-11 METAL CHIP 5.6K 0.5% 1/10W R212 1-208-800-11 METAL CHIP 5.6K 0.5% 1/10W Q104 8-729-421-19 TRANSISTOR UN2213-TX R213 1-216-065-91 RES-CHIP 4.7K 1/10W (NS325/NS530/NS725P/NS730P) R214 1-216-065-91 RES-CHIP 4.7K 1/10W...
  • Page 124 AF-98 ER-021 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R445 1-216-025-11 RES-CHIP 1/10W D929 8-719-069-56 DIODE UDZSTE-176.2B R446 1-216-025-11 RES-CHIP 1/10W D929 8-719-422-64 DIODE MA8062-M-TX R447 1-216-025-11 RES-CHIP 1/10W D930 8-719-056-90 DIODE UDZ-TE-17-13B R448 1-216-025-11 RES-CHIP 1/10W D930...
  • Page 125 ER-021 MB-108 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q903 8-729-424-11 TRANSISTOR UN2111-TX A-6061-386-A MB-108 BOARD COMPLETE Q906 8-729-024-89 TRANSISTOR MUN2213T1 (NS530:AUS) Q906 8-729-421-17 TRANSISTOR UN2213-TX ************************ Q907 8-729-024-83 TRANSISTOR MUN2111T1 A-6061-504-A MB-108 BOARD COMPLETE Q907 8-729-424-11 TRANSISTOR UN2111-TX...
  • Page 126 MB-108 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C216 1-164-230-11 CERAMIC CHIP 220PF 5.00% C313 1-164-677-11 CERAMIC CHIP 0.033UF 10.00% C218 1-162-965-11 CERAMIC CHIP 0.0015UF 10.00% C314 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% C219 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% C315...
  • Page 127 MB-108 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C439 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% (NS730P/NS725P) C441 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% C533 1-164-315-11 CERAMIC CHIP 470PF 5.00% 50V (NS530/NS330/NS333/NS430/NS433/NS730P/NS725P) (NS730P/NS725P) C442 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% C534 1-164-173-11...
  • Page 128 MB-108 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB602 1-469-784-11 FERRITE R105 1-216-809-11 METAL CHIP 1/10W FB603 1-469-784-11 FERRITE R106 1-216-809-11 METAL CHIP 1/10W R108 1-216-789-11 METAL CHIP 1/10W <FILTER> R110 1-216-821-11 METAL CHIP 1/10W R111 1-216-809-11 METAL CHIP...
  • Page 129 MB-108 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R169 1-216-081-00 RES-CHIP 1/10W R251 1-216-841-11 METAL CHIP 1/10W (NS530:HK,SP,TW,KR/NS730P:HK,SP,KR) R252 1-216-839-11 METAL CHIP 1/10W R169 1-216-089-11 RES-CHIP 1/10W (NS730P:ME2) R253 1-218-889-11 METAL CHIP 0.5% 1/10W R176 1-216-864-11 SHORT CHIP R254...
  • Page 130 MB-108 SW-384 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R406 1-218-831-11 METAL CHIP 0.5% 1/10W R608 1-216-864-11 SHORT CHIP (Except: NS725P/NS730P) (Except: NS725P/NS730P) R407 1-218-831-11 METAL CHIP 0.5% 1/10W R609 1-216-864-11 SHORT CHIP (Except: NS725P/NS730P) (Except: NS725P/NS730P) R408 1-218-831-11...
  • Page 131 SW-384 POWER (HS8S2U) POWER (ETXNY410E0F) POWER (ETXNY410M0F) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR803 1-216-295-91 SHORT CHIP 1-468-743-11 POWER BLOCK (ETXNY410M0F) JR801 1-216-295-91 SHORT CHIP (NS325:PX,E,BR,AR/NS530/NS725P:PX/NS730P) JR812 1-216-295-91 SHORT CHIP ******************************* <RESISTOR> <FUSE> R802 1-216-059-00 RES-CHIP 2.7K...
  • Page 132 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-080-594-51 MANUAL, INSTRUCTION (HANGLE) (NS530:KR/NS730P:KR) 3-080-594-61 MANUAL, INSTRUCTION (ARABIC) (NS530:EA,ME2/NS730P:ME2) 3-080-594-71 MANUAL, INSTRUCTION (PERSIAN) (NS530:ME2/NS730P:ME2) 3-080-598-12 MANUAL, INSTRUCTION (ENGLISH) (NS330:UK/NS430:UK) 3-080-598-22 MANUAL, INSTRUCTION (RUSSIAN) (NS330:RUS) 3-083-556-11 MANUAL, INSTRUCTION (NS325:BR) 3-083-557-11 MANUAL, INSTRUCTION (NS325:AR) 1-770-019-51...
  • Page 133 2003A0800-1 Sony Corporation 2003. 1 9-929-741-12 Home Storage Company Published by Customer Support Department – 133 –...

Table of Contents