Sony DVP-NS300 Operating Instructions Manual page 43

l
Dolby Digital 3 ch
IDOLBY DIGITAL j2Hii
7-T
+- I
I
Front (L/R) Rear
(monaural)
l
PCM (Stereo)
Sampling frequency
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below
Each channel is output from a separate
speaker
l
Front (L)
l
Front (R)
l
Center
l
Rear (L)
l
Rear (R)
l
Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals
l
LFE (Low Frequency Effect) signal
If
"DTS" is set to "OFF" in "AUDIO SETUP," the
DTS tlack selection option will not appear on the
ween even if the disc contains DTS tracks (page 59)
TV Virtual Surround Sound
Settings
(TVS)
w-m
When you connect a stereo TV or 2 front
speakers, TV Virtual Surround lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers
This function is designed to work with the
LINE OUT L/R (AUDIO) l/2 jacks
Note that if you select one of the TVS settings
while playing a DVD, the player does not
output Dolby Digital signals from the
DIGITAL OUT (COAXIAL and OPTICAL) g
jacks (when you set "DOLBY DIGITAL" in 5
"AUDIO SETUP" to "D-PCM") (page 59)
P
D
1
Press SURROUND during
playback
The Control Bar is displayed
pppl TVS DYNAMIC
I
Press SURROUND repeatedly to
select one of the TVS (TV Virtual
Surround) sounds
Refer to the explanations given for each
item
*TVS DYNAMIC
*TVS WIDE
*TVS NIGHT
*TVS STANDARD
continued -
43