Table of Contents
Advertisement
9.3.3 Configuring a generic non-linear sensor
Bosch Motorsport
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement'.
7.
Click 'Finish' when done.
8.
Enter channel name and description.
9.
Click 'OK' when done. The channel is inserted into the C 60 Project Tree.
Channel is
linked to
ANA04
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Example: Thermistor 5 kOhm
– From sensor data sheet: resistance values over temperature
Data_Logger_C_60_Manual
Analog and Frequency Inputs | 9
Sensitivity
Input pin
and Offset
Pull-up
value for
resistor is
sensor
deactivated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Adjustment
is enabled
43 / 100
Advertisement
Table of Contents
