Advertisement
2.4 HARDWARE & OPERATION FULL KEY
-11"LCD Monitor with softkey (Half Key)
-Axes module (PLC-56I/32O)
-Conversational turning application software.
-CPU-CNC with 128 Ram memory.
-32K Eeprom memory for PLC and customizing cover.
-Turning jop panel.
-Turning DNC soft fl oppy disk.
-RS232 Interface (V24), RS-422 Interface.
-USB interface.
-Constant surface speed (CSS)
-2 Electronic handwheel
-PLC with 16/32 bit processor/input/output module
2.5 CONTROL PANEL FUNCTION KEYS
1.
Coordinate preset.
2.
Tool management (Tool selection, tool calibration, geometry, location codes).
3.
Spindle control (Forward, backward, stop, speed enter).
4.
Operation at constant surface speed (CSS).
5.
Operation with live tools.
6.
Operation with axes jog keys.
7.
Operation with handwheels.
8.
Operation with conversational icons (Facing/turning/taper/rounding/grooving/
threading/drilling/tapping/positioning/profi ling cycle).
9.
Parts memory storage (P.Prog).
10. Single block mode.
11. Numeric key (A-Z, 0-9).
12. Cycle start & cycle stop.
13. Graphics representation.
14. Recall function.
15. Reset, Esc, Shift.
16. Main menu.
17. Home search.
18. ISO key:Conversational mode insert ISO program.
19. Feedrate enter & feedrate override.
20. Help.
21. Spindle speed override.
22. Shift + ESC :TC Mode (Conversational model) & T Mode (ISO) convert.
23. Video Off:Shift + Clear.
24. PCALL:User defi ned operation.
-21-
Advertisement
