Advertisement
(4) Only trained, qualifi ed workers should operate forklift trucks.
(5) Whenever operating a forklift truck, special care should be taken to
prevent collisions and damage any surroundings.
(6) Wire ropes or slings should be strong enough to load and lifting
should conform to the mandatory previsions.
(7) Grip workpieces securely.
(8) Stop machine before adjusting the coolant nozzle at the tip.
(9) Never touch a turning workpiece, spindle by hands or by any other
way.
(10) While a workpiece is turning, do not wipe it off or remove chips by
cloth or hand, always stop machine fi rst and then use a brush and
sweeper.
(11) Keep all guards and cover plates in place and all machine cabinet
doors closed.
(12) Stop the machine whenever installing or removing a tool.
(13) Whenever machining magnesium alloy parts, wear a protective
mask.
CAUTION:
(1)
During automatic operation, never open the machine door.
(2)
When performing heavy duty machining, carefully prevent chips from being
accumulate since hot chips can catch fi re.
1.6.8 To Interrupt Machining
WARNING:
When leaving the machine temporarily after completing a job, turn off the power
switch on the operation panel and the main circuit breaker.
1.6.9 Completing A Job
CAUTION:
(1)
Always clean the machine or equipment, remove and dispose of chips
and clean cover windows, etc.,
(2)
Do not clean the machine or equipment before it had stopped.
(3)
Return each machine component to its initial condition.
(4)
Check wipers does any breakage, replace broken wipers.
(5)
Check coolant, hydraulic oil and lubricant does any contaminate.
(6)
Check coolant, hydraulic oil and lubricant levels, add, if necessary.
(7) Clean the oil pan fi lter.
(8) Before leaving the machine at the end of the shift, turn off the power switch on
the operating panel, machine main circuit breaker and factory feeder switch in
that order.
-14-
Advertisement
