Advertisement
2.3.1 MACHINE SPECIFICATION (TY-2040/2060CNC)
Swing over bed ............................ 510 mm (20 ")
Swing over cross slide ................. 280 mm (11 ")
Center height ............................... 255 mm (10 ")
Bed width .................................... 370 mm (14-1/2")
Center admits between ................ 980 mm (38-37/64") / 1180 mm (58-1/4")
Motor for main spindle/coolant ............... 10 HP Inverter /1/4HP
(Standard)
H: 80-1600
L: 30-640
Spindle taper in nose/sleeve......................... MT#6
Spindle bore .................................................86 mm(3-3/8")
Longitudinal travel (Z-axis) .........................1000 mm (40") /1500(60")
Cross slide travel (X-axis) ...........................270 mm (10-5/8")
Cross slide dimension ..................................700 mm (27-1/2") x210 mm (8-1/4")
Tailstock Quill diameter .............................75 mm (2-15/16")
Tailstock Quill travel/taper .........................160 mm (6-5/16")MT#5
Ball screw diameter X-axis/Z-axis...............25 mm (62-64")/32mm(1-1/4")
Machine weigh dim.(LxWxH)2300kgs/2800kgs/L2575mm(101-3/8")/3025mm
The maximum8" 3-jaw universal chuck under 2000 R.P.M
The maximum8" 3-jaw hydraulic chuck under 2000 R.P.M
The maximum12" 4-jaw independent chuck under 300 R.P.M
The noise level is under 85dB before the machine delivere
(Optional)
H: 100-2000
L: 40-800
(119-1/8")/W1400mm(55")/H1840mm(72-1/2")
-20-
Advertisement
