Huawei PowerCube 500 Manual page 7

Installing an MA5671 Router
Installing an AR531 Router
4. Install the router communications cable.
Router
FE
9.3
Installing a Network Port SPD and Cables
9.4 Installing an Inverter, a PDU, and Cables
1. Install the inverter and power distribution unit (PDU).
Installing an NE05E-SK Router
5. Install router power cables.
Router power port
2. Install the ground cables for the inverter and PDU.
7
When installing the NE05E-
SK router, remove the small
tray and install the NE05E-
SK on the big tray.
Router
If a network port surge
protective device (SPD)
is configured, when
SPD
installing the signal
cable for the router,
route the signal cable
through the port on the
network port SPD and
then to the port on the
Camera
router.