Inspection And Cleaning; Visual Inspection; Exterior Cleaning; Interior Cleaning - GE T2100 Service Manual

Inspection and Cleaning

Visual Inspection

Exterior Cleaning

Interior Cleaning

4-4
Maintenance: Inspection and Cleaning
Regularly inspect the AC power cord and all other cords and cables for
fraying or other damage. Perform safety tests on any repaired cords.
Inspect all plugs, cables and connectors for bent prongs or pins. Verify
that all cords, socketed components, and connectors are securely seated.
Inspect the following for excessive wear or damage:
Walking belt
!
Drive belt
!
Handrail and hardware
!
Turn the GE T2100 Treadmill system off. Clean the exterior surfaces
with a clean, soft cloth and a mild dishwashing detergent diluted in
water. Wring out the excess water from the cloth and take care not to
drip solutions on the e-box connections and ports. (Use antiseptic cleaner
on the handrails and walking belt.) Avoid contact with open vents, plugs
or connectors. Dry the surfaces with a clean cloth or paper towel.
Complete any pre-service procedures prior to opening the unit or
performing any interior cleaning. Clean the unit as needed, but at least
once per month.
GE T2100 Treadmill
2021403-031
Revision A