General Description; Intended Use; Power Switch; Emergency Stop Switch (Estop) - GE T2100 Service Manual

General Description

Intended Use

Power Switch

Emergency Stop Switch (ESTOP)

Walking Belt

Revision A
Equipment Overview: General Description
Standard features include the emergency stop (ESTOP) switch, a full
handrail set, and a long, 60-inch walking surface. Designed for simplified
serviceability, the GE T2100 Treadmill has fewer moving parts than
other treadmills, built-in self-calibration, and easy-to-replace assemblies.
The GE T2100 Treadmill is intended for use with any one of the several
GE Medical Systems Information Technologies exercise testing systems
or the MTC-1 (manual treadmill controller) for administering a
controlled exercise load during a diagnostic stress test.
When turning the GE T2100 Treadmill power switch off, there is a period
of approximately 1 second when the remaining power cycles through the
system. The GE T2100 Treadmill will not power up until all remaining
power has cycled through the system. After turning the power off, wait
approximately 1 second before turning the power back on.
The emergency stop switch (ESTOP) is intended for emergency
situations where immediately stopping the GE T2100 Treadmill is
required to deliver appropriate emergency care to the patient or health
care provider, as implied by the American Heart Association "Guidelines
for Clinical Exercise Testing Laboratories" (1995). It is not intended for
routinely stopping the GE T2100 Treadmill.
NOTE
The ESTOP switch cable must be plugged into the GE T2100
Treadmill connection panel for the GE T2100 Treadmill to operate. If
the ESTOP is not installed, the GE T2100 Treadmill will not operate.
With the power switch in the OFF position (or with AC power
disconnected), the GE T2100 Treadmill walking belt can revolve freely in
either direction. With the power switch in the ON position but the GE
T2100 Treadmill not running, the GE T2100 Treadmill walking belt is
locked in both directions.
Press the emergency stop switch (ESTOP) and the GE T2100 Treadmill
promptly stops but the walking belt can still revolve freely for 20 seconds
(allowing for removal of foreign objects), after which the walking belt is
locked in both directions.
GE T2100 Treadmill
2021403-031
2-3