Sony CCP-8000 Installation Manual page 44

2-4. Installing the Operation Modules
*1 : When installing an MKS-8025/8025MS, and steps 1
to 3 described on the previous page have been
completed, connect the connectors by following the
procedure described below.
4. For MKS-8025MS, select a 1/2-wide case or 1/3-wide
case according to the installing space in the CCP-8000.
Secure the ground terminal by the screw (PSW3 x 5)
supplied with MKS-8025MS, then install the MKS-
8025MS into the selected case.
MKS-8025MS
PSW3 x 5
Ground
terminal
1/3-wide case
5. Connect the harness coming from the inside of the main
panel to the connector of the MKS-8025/8025MS.
6. Install the MKS-8025/8025MS and fix the four screws
on both sides.
7. Install the module covers.
n
The MKS-8025/8025MS can be installed in the right
end of the top-most line of the panel.
MKS-8025MS
Fixing screws
The illustration shows the MKS-8025MS
using the 1/2-wide case.
2-4
MKS-8025MS
PSW3 x 5
Ground
terminal
1/2-wide case
Module covers
Connector
Fixing screws
*2 : For the MKS-8031TB, the track ball installation work
is required upon completion of the above steps 1 to 5.
Install the track ball by following the procedure
described below.
6. Rotate the ball cover counter-clockwise and release the
lock.
7. Install the track ball and the ball cover.
8. Rotate the ball cover clockwise until it is locked.
Ball cover
Track ball
MKS-8031TB
CCP-8000 IM