Huawei TP48200A-HT19C4-1 Installation Manual page 86

TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
Step 3 Enter the IP address for the SMU in the address box of Internet Explorer. Log in to the
WebUI on the login page shown in


Figure 10-1 Login page
Step 4 On the System Settings tab page, select SNMP.


Issue 01 (2014-03-12)
The preset user name is admin and the preset password is Changeme.
You can set SNMP parameters on the WebUI locally or remotely.
If the SNMP version is SNMPv1 or SNMPv2c, set SNMP Version to
SNMPv1&SNMPv2c under SNMP, and then set SNMP Port Number, Read
Community Name, and Write Community Name, as shown in
Figure 10-2 Setting SNMPv1 and SNMPv2c parameters
If the SNMP version is SNMPv3, set SNMP Version to SNMPv3 under SNMP, click
Add under SNMPv3, and then set User Name, MD5 Password, and DES Password, as
shown in Figure 10-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 10-1.
10 Commissioning
Figure 10-2.
79