Huawei TP48200A-HT19C4-1 Installation Manual page 64

TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
Procedure
Step 1 Remove the front panel and top epoxy board from the PDU.
Step 2 Lay out the DC output cables.
Step 3 Secure the negative DC output power cable to the corresponding DC output circuit breaker
based on the actual load power.
Step 4 Secure the positive DC output power cable to the corresponding screw on the RTN+ busbar.
Figure 7-8 Installing DC output power cables
(1) DC load
----End
Issue 01 (2014-03-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Cables
57