Advertisement
Labels
4-22
Speaker Label Set
The speaker label (cover) seals the speaker grille, and is designed to provide
good sound transmission. It consists of a clear circular area surrounded by a
yellow rectangle.
Removing and Replacing Labels
Removal
Using a sharp tool such as a utility knife, carefully pick up one corner of the
damaged label and peel the entire label off the case. Be careful not to gouge
the case.
Replacement
1. Clean off all adhesive residue from the case by rubbing the dry surface
with your finger and 'rolling up' the adhesive residue. Solvents are inef-
fective, as is scraping with a tool.
2. Clean the surface with isopropyl alcohol. Allow it to dry.
3. Peel the new label off the backing material.
4. Starting with one straight edge, align the label carefully and roll it down
slowly into place.
5. Press firmly all around the label, especially the edges, to adhere it into
place.
Removal and Replacement
Advertisement
