Connecting An Additional Component - Siemens SINAMICS S120 Combi Equipment Manual

8.4

Connecting an additional component

An additional component is connected as follows to the DC link busbars and the 24 V
busbars:
1. Use a suitable screwdriver or tool from the accessories pack to open the protective cover
of the component which is to be connected.
2. Remove the DC link side covers of both components at the connection location
Figure 8-3
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Electrically connecting Motor Modules and DC link components
Prepared Motor Modules to connect the DC link busbars
8.4 Connecting an additional component
199