D-Link DIR-615 User Manual page 93

DIR-615 Wireless N300 Router
User Manual
To edit the parameters of an option, left-click the relevant line in the table. In the opened window,
change the needed parameters and click the APPLY button.
To remove the value of an option, select the checkbox located to the left of the relevant line in the
table and click the DELETE button (
In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address). The router
assigns IPv4 addresses in accordance with the specified pairs only when the DHCP server is
enabled (in the Dynamic IP Addresses section, the DHCP server value is selected from the
Mode of dynamic IP address assignment drop-down list).
To create a MAC-IPv4 pair, click the ADD button (
address field, enter an IPv4 address which will be assigned to the device from the LAN, then in
the MAC address field, enter the MAC address of this device. In the Hostname field, specify a
network name of the device for easier identification (optional). Click the APPLY button.
In order to view MAC addresses of the devices connected to the router at the moment, click the
KNOWN CLIENTS button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for the existing MAC-IPv4 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
To remove a MAC-IPv4 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
IPv4 pair in the editing window.
). Then click the APPLY button.
Figure 82. The section for creating MAC-IPv4 pairs.
). Then click the APPLY button. Also you can remove a MAC-
Page 93 of 163
Configuring via Web-based Interface
). In the opened window, in the IP