Firmware Update - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Firmware Update

On the Management / Firmware Update page, you can update the firmware of the router and
configure the automatic check for updates of the router's firmware.
!
Update the firmware only when the router is connected to your PC via a wired
connection.
The current version of the router's firmware is displayed in the Current firmware version field.
By default, the automatic check for the router's firmware updates is enabled.
To disable the automatic check for firmware updates, in the Remote Update section, move the
Check for updates automatically switch to the left and click the APPLY SETTINGS button.
To enable the automatic check for firmware updates, in the Remote Update section, move the
Check for updates automatically switch to the right and click the APPLY SETTINGS
button. By default, in the Remote server URL field, the D-Link update server address is
specified.
You can update the firmware of the router locally (from the hard drive of your PC) or remotely
(from the update server).
Figure 128. The Management / Firmware Update page.
Page 151 of 163
Configuring via Web-based Interface