D-Link DIR-615 User Manual page 125

DIR-615 Wireless N300 Router
User Manual
You can specify the following parameters:
Parameter
Name
Template
Interface
Protocol
Remote IP
Public port (start)/
Public port (end)
Private IP
Private port (start)/
Private port (end)
Click the APPLY button.
To edit the parameters of an existing server, select the relevant line in the table. On the opened
page, change the needed parameters and click the APPLY button.
General Settings
A name for the virtual server for easier identification. You can
specify any name.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Public Network Settings
The IP address of the host/subnet of the client that will connect to
the virtual server.
To add one more IP address, click the ADD REMOTE IP button
and enter the address in the displayed line.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
A port of the router from which traffic is directed to the IP address
specified in the Private IP field in the Private Network Settings
section. Specify the start and the end value for the port range. If you
need to specify one port, enter the needed value in the Public port
(begin) field and leave the Public port (end) field blank.
Private Network Settings
The IP address of the server from the local area network. To choose
a device connected to the router's LAN at the moment, select the
relevant value from the drop-down list (the field will be filled in
automatically).
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (start) field and leave the
Private port (end) field blank.
Page 125 of 163
Configuring via Web-based Interface
Description