Turning Tools - Siemens SINUMERIK 840D sl Programming Manual

Fundamentals
2.5 Tool offsets
Tool-specific parameters
$TC_TPG4
$TC_TPG5
$TC_TPG6
$TC_TPG7
$TC_TPG8
$TC_TPG9
$TC_TPG_DRSPATH
$TC_TPG_DRSPROG
The geometry length compensations, wear and base dimension can be chained for the left and right
1)
tool nose radius compensation. This means that the length compensations for the left cutting edge are
changed so that the values are also automatically entered for the right cutting edge, and vice versa.
2.5.5.5

Turning tools

The following tool types are available in the "Turning tools" group:
500
510
520
530
540
550
560
580
76
Roughing tool
Finishing tool
Plunge cutter
Parting tool
Threading tool
Button tool / forming tool (TOOLMAN)
Rotary drill (ECOCUT)
Probe with cutting edge position parameters
Meaning
Minimum wheel width
Actual wheel width
Maximum speed
Maximum circumferential velocity
Angle of inclined wheel
Parameter number for radius calculation
Directory path to the dressing program
Dressing program name
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
NC programming