Installing I/O Cards - Yamaha O2R96 Service Manual

02R96

INSTALLING I/O CARDS

This section explains how to install I/O Cards.
1 Turn off the 02R96.
2 Undo the two fixing screws and remove the slot
cover, as shown below.
Keep the cover and fixing screws in a safe place for future use.
3 Insert the card between the guide rails and slide it
all the way into the slot, as shown below. You may
have to push firmly to plug the card into the inter-
nal connector.
4 Secure the card using the attached thumbscrews.
Do not leave them loose, as the card will not be
grounded correctly, which may cause the 02R96 to
malfunction.
You can check which I/O Cards are installed on the Word
Clock Select page.
52