Yamaha O2R96 Service Manual page 191

Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0100aaaa 4a
Address LU (number H)
0nnnnnnn nn
Address LL (number L)
0nnnnnnn nn
End of exclusive
EOX 11110111 F7
12.3.17 Parameter change (Function call: Scene/Library
Clear)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Library
ADDRESS 00010000 10
Address UL (function)
0110aaaa 6a
0nnnnnnn nn Address LU (number H)
Address LL (number L)
0nnnnnnn nn
End of exclusive
EOX 11110111 F7
function
SCENE LIB CLEAR 0x60
EQ LIB CLEAR 0x61
GATE LIB CLEAR 0x62
COMP LIB CLEAR 0x63
EFF LIB CLEAR 0x64
CHANNEL LIB CLEAR 0x66
INPATCH LIB CLEAR 0x67
OUTPATCH LIB CLEAR 0x68
Bus to Stereo LIB CLEAR 0x69
Surround Monitor LIB CLEAR 0x6A 0-32
AUTOMIX LIB CLEAR 0x6B 1-16
12.3.18 Parameter change (Function call: pair , copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS. This is echoed if [Param-
eter change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified
channel. (Items other than PAIR are reserved for future use.)
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Pair
ADDRESS 00010001 11
Function
0000aaaa 0a
Source channel number H
DATA 0ddddddd dd
Source channel number L
0ddddddd dd
0ddddddd dd Destination channel number H
Destination channel number L
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
PAIR ON with COPY 0x00
PAIR ON with RESET BOTH 0x01
PAIR OFF 0x02
*1)0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 -
263:AUX8, 512:STEREO L - 513:STEREO R
number
1-99
41-200
5-128
37-128
1-128
2-128
0-32
0-32
0-32
Channel
*1)
*1)
*1)
Effect is 0:Effect 1–3:Effect 4
In the case of PAIR, you must specify channels for which pair-
ing is possible.
In the case of PAIR ON with COPY, you must specify Source
Channel as the copy source, and Destination Channel as the
copy destination.
12.3.19 Parameter change (Function call Event: Effect)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the corresponding effect's function activates (de-
pending on the effect type).
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 00000110 7F
Function call Event
ADDRESS 00010010 12
Function
0000aaaa 0a
-
DATA 00000000 00
0ddddddd dd Release:0, Press:1
-
00000000 00
Destination Effect Number 0 - 7
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
Freeze Play button 0x00
Freeze Record button 0x01
Auto Pan 5.1 Trigger Button 0x02
Auto Pan 5.1 Reset Button 0x03
• This does not activate when the effect type is different.
12.3.20 Parameter change (Key remote)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the same processing that is executed when the key
specified by Address is pressed (released). (Refer to the PARAMETER
CHANGE PARAMETER NUMBER LIST.)
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
02R96
MODEL ID 00001011 0B
Address UU
ADDRESS 00100000 20
Address UL
0aaaaaaa aa
Address LU
0aaaaaaa aa
Address LL
0aaaaaaa aa
0:press, 1:release
DATA 0ddddddd dd
End of exclusive
EOX 11110111 F7
12.3.21 Parameter change (Remote Meter)
When transmission is enabled by receiving a Request of Remote meter, the
specified meter information is transmitted every 50 msec for 10 seconds.
When you want to transmit meter information continuously, a Request
must be transmitted continuously within every 10 seconds.
Reception
This is echoed if [Parameter change ECHO] is ON.
Transmission
When transmission has been enabled by a Request, the parameter specified
by Address (see PARAMETER CHANGE PARAMETER NUMBER LIST)
will be transmitted on the [Rx CH] channel at 50 msec intervals for a du-
ration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if
the PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without
Channel
0:Effect1-3:Effect4
0:Effect1-3:Effect4
0:Effect1
0:Effect1
02R96
191