Siemens SIMATIC S5 Manual page 153

Programming the IP 265 with COM 265
9.5 Compiling the IP 265 User Program
Note
The IP 265 user program must be compiled before it can be stored on a memory sub-
module or loaded into the IP 265 over the I/O bus.
Prerequisites
• The IP 265 user program to be compiled must be specified in the "Defaults" form.
Initiating a compiler run
Select the "Compile" function in the "Function Selection" menu by pressing <F2>.
"Compile" form
Function Selection
F1 F2 F3 F4 F5 F6 F7 F8
Compile
F1 F2
Editor
Figure 9-15. "Compile" Form; Placing COM 265 Language Elements
9-48
"Compile"
F2
IP 265 program: IP265
F3 F4 F5
Compile
F1 F2 F3 F4 F5 F6 F7 F8
F6 F7 F8
Info Return
EWA 4NEB 812 6130-02a
IP 265