Programming the IP 265 with COM 265
9.4.4
Entering the Segment Name and Segment Commentary
In addition to the program logic, you can also input the following in order to document the IP 265
user program:
•
A header for each segment (segment name or segment header)
•
A commentary for each segment in the IP 265 user program (segment comments or segment
commentary)
Note
Segment header and segment comments are components of the IP 265 user program,
and are stored on the same file.
Segment name (segment header)
Proceed as follows to enter a segment name:
Press the <COM> key once only.
The input field for the segment name is displayed in reverse video on the "Editor" form's header
line ( Figure 9-14).
Type the segment name on the programmer keyboard.
Confirm your entry with <1>.
Press <ESC> to exit the input field without changing its original contents.
The segment name may comprise up to 24 characters.
Segment commentary
Proceed as follows to enter a segment commentary:
Press <COM> twice in succession in the "Editor" form.
The "Commentary" input form is displayed on the monitor.
Type your commentary text on the programmer keyboard.
9-46
IP 265
EWA 4NEB 812 6130-02a