Technical specifications
10.1
Scope
The technical specifications for general use cases can be found in the operating instructions
and in the section "General technical specifications (Page 83)".
If you are using SIPROCESS GA700 devices in hazardous areas, additional or alternative
specifications apply as described in the section "Technical specifications for operation in
hazardous areas (Page 97)". These specifications may deviate from the corresponding
general technical specifications.
10.2
General technical specifications
10.2.1
Determining the technical specifications
The technical specifications are determined according to the requirements of DIN EN 61207-
1. Unless specified otherwise, the data listed below relates to the following measuring
conditions.
Table 10- 1
Technical specifications
Ambient temperature
Ambient pressure
Sample gas flow
Sample gas humidity
Site of installation
Reference gas
Reference application
The technical specifications for time and measuring response as well as for the influencing varia-
1)
bles can sometimes differ significantly for other gas mixtures
Devices in explosion-proof design
Compact Operating Instructions, 05/2018, A5E35134047-03
Measuring conditions
OXYMAT 7
ULTRAMAT 7
25 °C
Atmospheric (approx. 1000 hPa)
0.6 l/min; Nl = Standard liter
Dew point < -40 °C
Free of vibration, shock and impact
Nitrogen (N
)
2
-
10
CALOMAT 7
-
Hydrogen in nitrogen (H
2
in N
)
2)
2
83