Epson RC420 Manual page 160

Maintenance 12. Recovering the HDD
(10) Select the <Agree> option button in the [License Agreement] dialog and click the
(11) Enter the "Product Key" recorded on the COA label attached on the front of the
(12) Input the serial number (SN*****) of the RC420 to the [Computer Name] box in the
(13) After rebooting, click the <OK> button in the [Windows Login] dialog.
(14) Windows starts.
NOTE
If the EPSON RC+ is not installed, the [Install the Robot Control Software] dialog appears
when the Controller is started. Make sure to install the EPSON RC+ in the Controller.
If it is not installed, Windows will automatically shutdown in 30 minutes.
150
<Next> button.
Controller (inside the front door) in the [Product Key] dialog and click the <Next>
button.
[Computer Name and Administrator Password] dialog and click the <Next> button.
RC420 Rev.9