Huawei AISU User Manual page 29

AISU
User Manual
Figure 5-3 Scan result of AISUs connected in daisy-chain mode
----End
Adding an AISU
You can run the ADD RAE command to add AISUs according to the scanning result.
Procedure
Step 1 In the parameter input area, enter ADD RAE in Command (F5), and then click Assist or
press Enter.
Step 2 In the parameter input area, specify related parameters.
The parameter values in the following figure are for reference only.
The AISU can be configured in either of the following ways based on the installation scenario.
Figure 5-4 Parameter configuration for AISUs connected in regular mode
Issue 02 (2017-06-12)
 The SN starting with the letter Z indicates the SN of the AISU. For details about the SN, see section
1.4 "Description of AISU SNs."
 If the AISUs are connected in daisy-chain mode, two SNs are scanned. The correct SN must be read.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuration Guide
24