Table of Contents
Advertisement
AISU
User Manual
----End
Scanning the AISUs
If the AISU is working properly, you can run the SCN ALD command to scan the AISU
connected to the base station. All the AISUs physically connected to the base station can be
scanned, regardless of whether these AISUs are configured or not.
Procedure
Step 1 In the parameter input area, enter SCN ALD in Command Input (F5), and then click Assist
or press Enter.
Step 2 In the parameter input area, specify related parameters.
The parameter values in the following figure are for reference only.
Step 3 Press F9 or click Exec.
If Operation succeeded is displayed in the command export area, the AISU is scanned
successfully. If the AISU fails to be scanned, identify causes and scan the AISU again.
Figure 5-2 Scan result of AISUs connected in regular mode
Issue 02 (2017-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuration Guide
23
Hide quick links:
Advertisement
Table of Contents
