LG MULTI V HYDRO KIT ARNH963K2A4 Installation Manual page 8

SAFETY PRECAUTIONS
Do not allow water, dirt, or animals to enter the (Hydro Kit)
unit.
Do not operate the unit with the panel(s) or protective
ing parts.
The rotating, hot, cold, and high-voltage parts of the unit will cause
physical injury or death.
Do not touch the refrigerant piping during or after opera-
tion.
It will cause burns or frostbite.
Use a soft cloth to clean the unit.
gents, solvents, etc.
Ensure that power cable cannot be pulled out or damaged
during operation.
CAUTION
To avoid physical injury, use caution when cleaning or servic-
ing the air conditioner.
There is risk of electric shock, physical injury or death.
If the unit is not used for long time,
power supply to the unit.
Water in the Hydro Kit will freeze, resulting in product malfunction or
damage.
Do not allow water, dirt, or animals to enter the (Hydro Kit)
unit.
There is risk of unit damage and operation failure.
Periodically check that the frame and mounts are not dam-
aged.
There is a risk of product damage.
8
-
Do not use harsh deter-
do not switch off the
Do not place anything on the power cable.
Do not disconnect the power supply during operation.
Do not disconnect the power supply of the Hydro Kit if op-
eration needs to be stopped. Always turn Hydro Kit off using
the wired remote controller.
shock, physical injury and / or death.
Do not place a heater or other appliances near the power
cable.
Turn the power off at the breaker or disconnect when clean-
ing, maintaining the unit, and before opening the unit to
check or repair electrical parts and wiring.
There is risk of electrical shock, physical injury, and / or death.
Periodically ventilate the unit when operating it together with
a stove, etc.
Use a stable ladder or stool when cleaning or maintaining the
unit.
A fall could occur, resulting in physical injury.
Do not make substitutions if a refrigerant recharge is nec-
essary. Use the refrigerant listed on the nameplate of the unit.
unit will malfunction and be damaged.
Use a soft cloth to clean.
solvents, etc.
Any plastic parts of the unit will be damaged.
Do not use harsh detergents,