Remote Connection With Operator Client; Remote Connection With Video Security App; Maintenance; Monitoring The System - Bosch DIVAR IP all?in?one 5000 Series Installation Manual

DIVAR IP all-in-one 5000
Notice!
Only use BVMS Operator Client or Video Security App in the
version that matches DIVAR IP. Other clients or application
software may work but are not supported.
5.3.1

Remote connection with Operator Client

To make a remote connection with BVMS Operator Client:
1.
2.
3.
5.3.2

Remote connection with Video Security App

To make a remote connection with Video Security App:
1.
2.
3.
4.
5.
6.
7.
8.
6

Maintenance

6.1

Monitoring the system

The system provides tools for health monitoring.
To activate the monitoring functionality, you have to logon to the
administrator account (BVRAdmin).
Bosch Security Systems B.V.
Install BVMS Operator Client on the client workstation.
After finishing the installation successfully, start Operator
Client using the desktop shortcut
Enter the following, then click OK.
User name: admin (or other user in case one is configured)
Password: enter user password
Connection: ssh://[public-IP-address-of-DIVAR-IP_all-in-
one]:5322
In Apple's App Store search for Bosch Video Security.
Install the Video Security app on your iOS device.
Start the Video Security app.
Select Add.
Enter the public IP address or dynDNS name.
Make sure Secure Connection (SSL) is switched on.
Select Add.
Enter the following:
User name: admin (or other user in case one is configured)
Password: enter user password
Maintenance | en
.
2019.08 | V1 | DOC
29