Bosch DIVAR IP all?in?one 5000 Series Installation Manual page 15

DIVAR IP all-in-one 5000
Button Description
Reset
Control panel LEDs
LED
Power
HDD
Network
Informat
ion
Bosch Security Systems B.V.
The reset button is used to reboot the system.
Description
This LED indicates that power is being supplied to
the system's power supply units.
This LED should normally be illuminated when the
system is operating.
This LED is not used.
This LED indicates network activity when flashing.
This LED indicates the system status.
System status
Continuously on and
red
Blinking red (1 Hz)
Blinking red (0.25 Hz) Power failure: check for an
System overview | en
Description
An overheat condition has
occurred. (This may be
caused by cable congestion.)
Fan failure: check for an
inoperative fan.
inoperative power supply.
2019.08 | V1 | DOC
15