Installing A Hard Drive; Removing A Hard Drive Carrier From A Hard Drive Bay - Bosch DIVAR IP all?in?one 5000 Series Installation Manual

16 en | Installing a hard drive
LED
3

Installing a hard drive

The DIVAR IP all-in-one 5000 system features four front-
swappable hard drives. The hard drives are mounted in hard
drive carriers to simplify their installation and removal from the
chassis. These hard drives carriers also help promote proper
airflow for the hard drive bays.
Procedure
To install a hard drive, you have to perform following steps:
1.
2.
3.
Notice!
Review the warnings and precautions listed in this manual
before performing works on the chassis.
3.1 Removing a hard drive carrier from a hard
drive bay
To remove a hard drive carrier from a hard drive bay:
1.
2.
2019.08 | V1 | DOC
Description
Solid blue
Blinking blue
(300 msec)
Removing a hard drive carrier from a hard drive bay, page 16
Installing a hard drive into a hard drive carrier, page 17
Installing a hard drive carrier into a hard drive bay, page 19
Unlock the front cover and swing it open.
Press the release button to the right of the hard drive
carrier. This extends the hard drive carrier handle.
DIVAR IP all-in-one 5000
Local UID has been
activated. Use this function
to locate the unit in a rack
environment.
Remote UID has been
activated. Use this function
to locate the unit from a
remote location.
Bosch Security Systems B.V.