HP 81110A Quick Start Manual page 71

2 Press the
menu. Use the cursor keys to move the Entry Focus to the Trigger
mode
PULSES.
and then
Figure 26
3 Press the
• Move the Entry Focus to the Output 1 status with the cursor keys.
Select
NOTE:
• Move the Entry Focus to
HP 81110/04A Quick Start
softkey to enter the Operating/Trigger Mode
|MODE/TRG|
Move the Entry Focus to the right and select
CONTINUOUS.
Move the Entry Focus down to select
Pulse-Period: internal PLL.
Current MODE/TRG Screen
softkey to enter the Timing menu.
|TIMING|
in the Modify area to turn on the Output 1.
ON
The Output channel can be turned on and off in either the
or
|LEVELS| |TIMING|
the keys toggles the output state from on to off and vise versa.
Getting Started
screens or by the following: pressing
for Output 1 and
for Output 2. Repeated pressing of
and select .
Per Freq
Getting Started
Examples
Single-Pulses at Out1
73