Cable Routes Inside An It Cabinet - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Step 4 Lay out the PDU2000 cables on the top of the cabinet and reinstall the rodent-proof mesh, as
shown by (4) in Figure A-43.
Step 5 Install the PDU2000 cables for other IT cabinets in the same way.
----End
Follow-up Procedure
Before connecting the power plug of a device to the PDU2000, loosen the locking device on
the PDU2000. After connecting the power plug, tighten the locking device.
A.8 Cable Routes Inside an IT Cabinet
Figure A-44, Figure A-45, and Figure A-46 show the routes of the cables out from the front of
customer equipment.
Figure A-44 Cable route along a horizontal cable manager
(1) Small cable ring
(3) Customer equipment
Issue 04 (2017-06-30)
The number of cables and holes shown in the figure is for reference only.
 Route cables neatly inside the IT cabinet by following instructions in 10.1 System Cabling Rules.
 Signal cables or weak-current cables inside cabinets are sorted by cable managers, cable rings, and
cable trays.
 The cable colors shown in figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Cable manager
A Appendix
240