Maintenance and servicing
6.4 Replacing components
Installation steps
Installing is the same as removing, however in the reverse order.
NOTICE
Specifications for installation
The tightening torques specified in the table "Tightening torques for screw connections"
must be observed.
Carefully insert the plug connections and ensure that they are secure.
Note
Connection clip for the interference-suppression capacitor
The connection clip to the interference suppression capacitor is mounted on the spare power
block together with a yellow warning label.
Please note the information in the chapter "Connecting Cabinet Modules to non-grounded
line supplies (IT systems)".
282
Cabinet Modules
Manual, 03/2013, A5E03263538A