Replacing The Wifi Module - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 2 Disconnect cables from the smart ETH gateway.
Step 3 Remove the failure smart ETH gateway from the guide rails.
Figure 5-46 Removing the smart ETH gateway
Step 4 Install the reserved smart ETH gateway in the original position and connect the cables.
Step 5 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 6 Log in to the ECC800 WebUI, and edit the plan view by adding new devices.
Step 7 Check the parameters and communication status of the smart ETH gateway to ensure normal
communication.
----End

5.4.6 Replacing the WiFi Module

Impact on the System
The app cannot be connected.
Preparations
Material: WiFi module
Procedure
Step 1 Remove the old WiFi module from the USB port on the ECC800.
Step 2 Install the spare WiFi module in the original position.
Step 3 Log in to the ECC800 WebUI. For details about Wi-Fi commissioning, see the
FusionModule2000 Smart Modular Data Center V500R003C10 Commissioning Guide.
Issue 04 (2020-01-03) Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
88