Huawei FusionModule2000 V500R003C10 Maintenance Manual page 77

FusionModule2000 Smart Modular Data Center
Maintenance Guide
3.
Figure 5-23 Removing a hard disk
Step 3 Install a new hard disk.
1.
2.
3.
4.
Figure 5-24 Installing a new hard disk
Step 4 Observe the hard disk indicator to check whether the hard disk works properly.
----End
Issue 04 (2020-01-03)
Use a screwdriver to loosen the screws from the hard disk and remove the hard disk.
Install the new hard disk.
Secure the hard disk to the front panel using a screwdriver.
Push the hard disk into the subrack along the guide rails until it cannot move forwards.
Close the ejector lever and push the hard disk in position.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
70