Huawei FusionModule2000 V500R003C10 Maintenance Manual page 70
Smart modular data center
Hide thumbs
Also See for FusionModule2000 V500R003C10:
- Installation manual (318 pages) ,
- Product description (217 pages) ,
- Maintenance manual (144 pages)
Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
4.
Step 3 Install a new hard disk.
1.
Issue 04 (2020-01-03)
Figure 5-15 Removing the upper cover of the chassis
When removing the upper cover from the chassis, do not use one hand to perform this operation.
Otherwise, the upper cover may collide with the components inside the device, bringing risks of
component damages.
Loosen the screws that are used to fix the disk at the back of the device, remove the
power and SATA cables from the disk, and remove the disk.
Take two removed screws, and preinstall the two screws in the holes near the cable outlet
on the hard disk backplane. Tighten the screw threads for three circles (ensure that the
screws do not fall naturally).
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
63
Advertisement
Table of Contents
