Port Menu⎯Setting Receive Multicast Ip Addresses (Logical Ethernet Input Ports Only) - Motorola OM 1000 Installation And Operation Manual

4-26 Setup and Operation
PORT Menu⎯Setting Receive Multicast IP Addresses (Logical Ethernet Input Ports Only)
Each logical Ethernet input port receives data that is sent to the OM 1000 as either singlecast
or broadcast packets. In addition, each Ethernet input port can receive data that is sent to it as
multicast data. Up to five multicast host IP addresses can be set up for each logical Ethernet
input port. Figure 4-16 illustrates setting the logical Ethernet input port multicast receive IP
address:
Figure 4-16
Setting up logical Ethernet input port multicast receive IP addresses
Main menu
Port
PORT
selection
To set up the multicast IP host addresses for a logical Ethernet input port:
1
Select the PORT option on the MAIN menu.
2
Select a logical Ethernet input port (1 through 16) at the PORT ## prompt.
OM 1000 Installation and Operation Manual
Port (logical)
1
setup Port
through
menu selection
16
Physical
interface
Operation
ULCKD
state
LCKD
OFF
Port
IN
mode
OUT
Back to
UP
main menu
To Multicast
receive menu
MORE
(disabled if not IN)
SRC-UDP
XXXXX
port #
To PIDTBL
PIDTBL
config menu
Active only if
COMMIT
changes are
made to Port
configuration
Multicast
224.000.000.000
receive
RCV-IP#
menu
239.255.255.255
1-5
Back to Port
setup menu
to
UP