TTI - continued
Recovery Transmission allows
2
Select the TTI Print
the operator to re-transmit a
Option
document after
tially specified number of redial
attempts.
Select the TTI Print option.
If the Recovery Transmission is
To select INSIDE, press:
set to ON, the document is
stored in memory for a specified
length of time. You may retrans-
mit the document during this
time period without re-scanning
To select OUTSIDE, press:
the original document.
To select OFF, press:
The display shows the screen
below to indicate that the menu
selection is accepted. To return
to the Standy Mode, press
.
OPERATION COMPLETED
168
Setting Recovery Transmission
1
failing the ini-
Press:
RECOVERY TRANSMIT
1.ON
2.OFF
Display the
2
Select the Recovery
RECOVERY
Transmit Option
TRANSMIT Menu
Select the Recovery Transmit
option.
To turn ON Recovery Transmis-
+
sion, press:
+
Go to Step 3.
To turn OFF Recovery Trans-
+
mission, press:
+
Skip the procedure in Step 3.
Your setting is now complete.
The facsimile will display the
same screen shown in Step 3.
RECOVERY TRANSMIT
STORED TIME =(01-24)
3
Enter the STORED
TIME
Enter the stored time length (01
to 24, in unit of hours).
Then press:
When completed, the following
screen
is
displayed.
Press
to return to the Standby
Mode.
OPERATION COMPLETED
06