Huawei iBattery 3.0 User Manual page 60

iBattery 3.0
User Manual
Figure 5-14 Battery Curve
Figure 5-15 Parallel Net Join Config
System Settings
Time
IP Address
Battery Curve
Parallel Net Join
Config
Step 2 Log in to the NetEco, choose Configuration on the homepage, and select Data Center
Planning from the drop-down list box.
Step 3 Select the site where the iBOX is located, and select Battery Detector from the Device
drop-down list box.
Step 4 Drag the battery detector icon to the creation area. On the Management Info pane, set the
Name, IP Address, Port, and Connection Mode for the iBOX.
Issue 07 (2019-12-30)
Description
Set the local time zone, date, and time.
Set the IP address, subnet mask, and default gateway of the iBOX.
Set this parameter based on the IP address assigned by the
administrator.
Sets the battery curve based on the battery brand and format.
Sets this parameter when you connect iBOXs in parallel.
Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
54