To make an outgoing call with DISA
1. From outside the
system, dial the
DISA CO line
telephone number.
2. Listen for repetitive
ringback tone, then
dial tone.
3. Enter a CO line
number or line group
access code.
4. Enter a DISA
security code, if
required (see the
System
Administrator), + the
code and listen for
CO dial tone.
5. Press
timer four more
minutes; otherwise,
the call disconnects
approximately one
min. after the tone.
6. Dial a telephone
number.
Strata AirLink Integrated Wireless Handset 5/99
The System Administrator has the appropriate
number.
You hear dial tone for 10 seconds that enables direct
dialing of a station internal number or CO line
access code.
If a number is not dialed, the system automatically
causes the DISA CO line to ring at telephones as a
normal incoming call. If the call is not answered
within 15 seconds after the ringing starts, it
disconnects.
You hear CO dial tone, then a four minute timer tone
plays that both parties hear after the call connects.
Note
3
to reset the
Direct Inward System Access (DISA)
If the correct security code is not entered, the
call is disconnected.
Standard Features
95