Siemens SINUMERIK 840 Planning Manual page 367

10 Data fields
10.3 Interface input/output buffer DBs (DB 136 to DB 143)
Address key
Format
DW 30 KH
DW 31 KH
DW 32 KM*)
DW 33 KM*)
DW 34
DW 35 **)
DW 36 **)
DW 37
DW 38 **)
DW 39 **)
DW 40 **)
DW 41 **)
DW 42 **)
DW 43 **)
DW 44 **)
DW 45
_______
*) If a computer is specified as source and bit routing in ASCII format activated, the contents must be
specified in ASCII code (see Section 5, description of FB 139).
**) To be specified in BCD code
10–38
Dynamic buffer
DR
DL
Shaft
Tool size in front/behind
Identification bits
DW status word (DWZW)+3
Unassigned
ID No. High-order word
ID No. Low-order word
Duplo No.
User data 1
User data 2
User data 3
User data 4
User data 5
User data 6
User data 7
Unassigned
© Siemens AG 1991 All Rights Reserved
01.91
Comment
DBZW+1
High-order
byte
DBZW+1
Low-order byte
DBZW+2
Tool
data
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)